Kim Sohyeon, Lee Hannah, Jung Gyeong-Hun, Kim Minji, Kim Ilsoo, Han Myungsoo, Lee Suhan, Oh Semi, Lim Jae-Hong, Kim Kyoung-Kook
Department of IT Semiconductor Convergence Engineering, Research Institute of Advanced Convergence Technology, Tech University of Korea Siheung 15073 Republic of Korea
LG Display Research and Development Center Seoul 07796 Republic of Korea.
Nanoscale Adv. 2022 Nov 9;5(4):1079-1085. doi: 10.1039/d2na00496h. eCollection 2023 Feb 14.
Recently, high-efficiency III-nitride photonic emitters (PEs) for next-generation displays have been studied. Although micro-light-emitting diodes (μ-LEDs), one of the III-nitride PEs, have attracted considerable attention because of their high efficiency and size flexibility, they have encountered technical limitations such as high defect rate, high processing cost, and low yield. To overcome these drawbacks of μ-LEDs, a lot of research on PEs using one-dimensional (1D) gallium nitride-related nanorods (GNRs) capable of horizontally self-positioning on the electrodes has been carried out. The degree of array of GNRs on the interdigitated electrodes (IDEs) is an important factor in the efficiency of the PEs using GNRs to obtain excellent single-pixel characteristics. Therefore, in this study, we demonstrate that the improved performance of self-arrayed GNRs was realized using the dielectrophoresis technique by changing the thickness of IDEs. In addition, the shape and size of vertically aligned GNRs were controlled by the wet process, and GNR-integrated PEs (GIPEs) were driven by perfectly horizontally self-arrayed GNRs on IDEs. The electroluminescence (EL) intensity of the GIPEs was measured at 4-20 V and showed a maximum intensity value at 15 V. Over the injection voltage at 20 V, the EL intensity decreased due to the high current density of GIPEs. The external quantum efficiency (EQE) property of the GIPEs showed a similar efficiency droop as that of conventional III-nitride PEs.
近年来,人们对用于下一代显示器的高效III族氮化物光子发射器(PEs)进行了研究。尽管作为III族氮化物PEs之一的微发光二极管(μ-LEDs)因其高效率和尺寸灵活性而备受关注,但它们也遇到了诸如高缺陷率、高加工成本和低良率等技术限制。为了克服μ-LEDs的这些缺点,人们对使用能够在电极上水平自定位的一维(1D)氮化镓相关纳米棒(GNRs)的PEs进行了大量研究。叉指电极(IDEs)上GNRs的排列程度是使用GNRs的PEs获得优异单像素特性效率的一个重要因素。因此,在本研究中,我们证明了通过改变IDEs的厚度,利用介电泳技术实现了自排列GNRs性能的提升。此外,通过湿法工艺控制了垂直排列GNRs的形状和尺寸,并由IDEs上完美水平自排列的GNRs驱动集成了GNRs的PEs(GIPEs)。在4 - 20 V下测量了GIPEs的电致发光(EL)强度,在15 V时显示出最大强度值。在20 V的注入电压以上,由于GIPEs的高电流密度,EL强度下降。GIPEs的外量子效率(EQE)特性显示出与传统III族氮化物PEs类似的效率下降。