Intraoperative Fluoroscopy Radiation Using OEC 9900 Elite C-arm: Risk and Method for Decreasing Exposure.

The use of intraoperative fluoroscopy in surgery produces scattered radiation that can expose all operating room personnel to measurable and, in some cases, substantial radiation doses. The goal of this work is to assess and document potential radiation doses to various staff positions in a simulated standard operating room environment. Adult-sized mannequins wearing standard lead protective aprons were placed at seven positions around large and small BMI cadavers. Doses were recorded in real time at thyroid level with Bluetooth-enabled dosimeters for a variety of fluoroscope settings and imaging views. A total of 320 images were acquired, resulting in 2,240 dosimeter readings from the seven mannequins. Doses were compared to cumulative air kerma (CAK) calculations provided by the fluoroscope. There was a strong correlation between the CAK and the recorded scattered radiation doses ( P < 0.001). Radiation doses could be reduced by manipulating C-arm manual technique settings [e.g., turning off the automatic exposure control (AEC) and using pulse (PULSE) or low dose (LD) settings]. Staff position and patient size also affected the recorded doses. The highest radiation doses were recorded across all settings for the mannequin positioned immediately adjacent to the C-arm x-ray tube. The larger BMI cadaver generated greater scattered radiation than the smaller BMI cadaver for all views and settings. This work provides suggestions for reducing exposure to operating room personnel beyond standard techniques of reducing beam-on time, increasing the distance from the radiation source, and use of shielding. Simple changes in C-arm settings (turning AEC off, avoiding DS setting, use of PULSE or LD settings) can markedly reduce dose to staff.