Gasmi Intissar, Hamdaoui Oualid, Ferkous Hamza, Alghyamah Abdulaziz
Department of Process Engineering, Faculty of Engineering, Badji Mokhtar, Annaba University, P.O. Box 12, 23000 Annaba, Algeria.
Chemical Engineering Department, College of Engineering, King Saud University, P.O. Box: 800, Riyadh 11421, Saudi Arabia.
Ultrason Sonochem. 2023 May;95:106361. doi: 10.1016/j.ultsonch.2023.106361. Epub 2023 Mar 8.
The intensive consumption of pharmaceuticals and drugs in the last decades has led to their increased concentrations in wastewaters from industrial sources. The present paper deals, for the first time, with the sonochemical degradation and mineralization of furosemide (FSM) in water. FSM is a potent loop diuretic used to treat fluid build-up due to heart failure, liver scarring, or kidney disease. The influence of several operating parameters such as acoustic intensity, ultrasonic frequency, initial FSM concentration, solution's pH, nature of the dissolved gas (Ar, air and N) and radical scavengers (2-propanol and tert-butanol) on the oxidation of FSM was assessed. The obtained results showed that the degradation rate of the drug increased significantly with the increase of the acoustic intensity in the range of 0.83 to 4.3 W cm and decreased with the augmentation of the frequency in the range of 585-1140 kHz. It was also found that the initial rate of the sonolytic degradation of FSM increased with the increase of its initial concentration (2, 5, 10, 15 and 20 mg/L). The most significant degradation was achieved in acidic conditions at pH 2, while in terms of saturating gas, the rate of FSM degradation decreased in the order of Ar > air > N. The FSM degradation experiments with radical scavengers showed that the diuretic molecule degraded mainly at the interfacial region of the bubble by hydroxyl radical attack. Additionally, in terms of acoustic conditions, the sono-degradation of 30.24 µmol L of FSM solution demonstrate an optimal performance at 585 kHz and 4.3 W/cm, the results indicated that even if the ultrasonic action eliminated the total concentration of FSM within 60 min, a low degree of mineralization was obtained due to the by-products formed during the sono-oxidation process. The ultrasonic process transforms FSM into biodegradable and environmentally friendly organic by-products that could be treated in a subsequent biological treatment. Besides, the efficiency of the sonolytic degradation of FSM in real environmental matrices such as natural mineral water and seawater was demonstrated. Consequently, the sonochemical advanced oxidation process represent a very interesting technique for the treatment of water contaminated with FSM.
在过去几十年中,药品和药物的大量使用导致其在工业废水里的浓度增加。本文首次探讨了水中速尿(FSM)的声化学降解和矿化。FSM是一种强效袢利尿剂,用于治疗因心力衰竭、肝纤维化或肾病引起的液体潴留。评估了声强、超声频率、FSM初始浓度、溶液pH值、溶解气体性质(氩气、空气和氮气)以及自由基清除剂(2-丙醇和叔丁醇)等几个操作参数对FSM氧化的影响。所得结果表明,在0.83至4.3W/cm范围内,药物的降解速率随声强增加而显著提高,在585 - 1140kHz范围内随频率增加而降低。还发现FSM的声解初始速率随其初始浓度(2、5、10、15和20mg/L)增加而增加。在pH为2的酸性条件下降解最为显著,而就饱和气体而言,FSM的降解速率按氩气>空气>氮气的顺序降低。添加自由基清除剂的FSM降解实验表明,利尿剂分子主要在气泡的界面区域通过羟基自由基攻击而降解。此外,在声学条件方面,30.24µmol/L的FSM溶液在585kHz和4.3W/cm时声降解表现出最佳性能,结果表明,即使超声作用在60分钟内消除了FSM的总浓度,但由于声氧化过程中形成的副产物,矿化程度较低。超声过程将FSM转化为可生物降解且环保的有机副产物,可在后续生物处理中进行处理。此外,还证明了FSM在天然矿泉水和海水等实际环境基质中的声解效率。因此,声化学高级氧化过程是一种处理受FSM污染水的非常有吸引力的技术。