Ferkous Hamza, Hamdaoui Oualid, Pétrier Christian
Department of Process Engineering, Faculty of Technology, Badji Mokhtar - Annaba University, P.O. Box 12, 23000 Annaba, Algeria.
Chemical Engineering Department, College of Engineering, King Saud University, P.O. Box 800, 11421 Riyadh, Saudi Arabia.
Ultrason Sonochem. 2023 Aug;98:106488. doi: 10.1016/j.ultsonch.2023.106488. Epub 2023 Jun 15.
There is a lack of literature on peroxynitrite formation due to sonolysis of aerated water. In this work, the impact of sonication parameters, frequency and power, on ultrasonic peroxynitrite production in aerated alkaline water was investigated. Peroxynitrite formation was clearly established with undeniable evidence at all the tested frequencies in the range of 516-1140 kHz with a typical G-value (energy-specific yield) of 0.777 × 10, 0.627 × 10, 0.425 × 10 and 0.194 × 10 mol/J at 516, 558, 860 and 1140 kHz, respectively. The ultrasonication frequency has a direct impact on the sonochemical peroxynitrite production. Increasing the ultrasonication frequency in the interval 321-1140 kHz reduces peroxynitrite formation. The most practical sonochemistry dosimetries, including hydrogen peroxide production, triiodide dosimetry, Fricke dosimetry, and 4-nitrocatechol formation, were compared with the sonochemical efficiency of the reactors used to produce peroxynitrite. The G-value, energy specific yield, for the tested dosimetries was higher than that for peroxynitrite formation, regardless of frequency. For all chemical dosimetries investigated, the same trend of frequency dependence was found as for peroxynitrite generation. The influence of ultrasonication power on peroxynitrite formation by sonication at diverse frequencies in the interval 585-1140 kHz was studied. No peroxynitrite was formed at lower acoustic power levels, regardless of frequency. As the frequency increases, more power is required for peroxynitrite formation. The production of peroxynitrite increased as the acoustic power increased, despite the frequency of ultrasonic waves. Ultrasonic power is a key factor in the production of peroxynitrite by sonolysis. Since peroxynitrite is uniformly distributed in the bulk solution, peroxynitrite-sensitive solutes can be transformed both in the bulk of the solution and in the surfacial region (shell) of the cavitation bubble. The formation of peroxynitrite should be taken into account in sonochemistry, especially at higher pH values. Ultrasonic peroxynitrite formation in alkaline solution (pH 12) can be considered as a kind of chemical dosimetry in sonochemistry.
关于曝气水超声空化产生过氧亚硝酸根的文献较少。在本研究中,考察了超声参数(频率和功率)对曝气碱性水中超声产生过氧亚硝酸根的影响。在516 - 1140kHz范围内的所有测试频率下,均有确凿证据明确证实了过氧亚硝酸根的形成,在516kHz、558kHz、860kHz和1140kHz时,典型的G值(能量比产率)分别为0.777×10、0.627×10、0.425×10和0.194×10 mol/J。超声频率对声化学产生过氧亚硝酸根有直接影响。在321 - 1140kHz区间内增加超声频率会减少过氧亚硝酸根的形成。将最实用的声化学剂量测定方法,包括过氧化氢生成、三碘化物剂量测定、弗里克剂量测定和4 - 硝基邻苯二酚生成,与用于产生过氧亚硝酸根的反应器的声化学效率进行了比较。无论频率如何,测试剂量测定方法的G值(能量比产率)均高于过氧亚硝酸根形成的G值。对于所有研究的化学剂量测定方法,发现其频率依赖性趋势与过氧亚硝酸根生成的趋势相同。研究了在585 - 1140kHz区间内不同频率下超声功率对超声空化产生过氧亚硝酸根的影响。无论频率如何,在较低声功率水平下均未形成过氧亚硝酸根。随着频率增加,形成过氧亚硝酸根需要更多功率。尽管超声波频率不同,但过氧亚硝酸根的产生随着声功率的增加而增加。超声功率是超声空化产生过氧亚硝酸根的关键因素。由于过氧亚硝酸根均匀分布在本体溶液中,对过氧亚硝酸根敏感的溶质在溶液本体和空化气泡的表面区域(壳层)均可发生转化。在声化学中,尤其是在较高pH值下,应考虑过氧亚硝酸根的形成。碱性溶液(pH 12)中超声产生过氧亚硝酸根可被视为声化学中的一种化学剂量测定方法。