Suppr超能文献

用于修复铅(II)污染水体系统的黄原胶锚定α-FeO生物纳米复合材料的合成

Synthesis of Xanthan Gum Anchored α-FeO Bionanocomposite Material for Remediation of Pb (II) Contaminated Aquatic System.

作者信息

Alharthi Fahad A, Alshammari Riyadh H, Hasan Imran

机构信息

Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia.

出版信息

Polymers (Basel). 2023 Feb 24;15(5):1134. doi: 10.3390/polym15051134.

Abstract

Increases in community and industrial activities have led to disturbances of the environmental balance and the contamination of water systems through the introduction of organic and inorganic pollutants. Among the various inorganic pollutants, Pb (II) is one of the heavy metals possessing non-biodegradable and the most toxic characteristics towards human health and the environment. The present study is focussed on the synthesis of efficient and eco-friendly adsorbent material that can remove Pb (II) from wastewater. A green functional nanocomposite material based on the immobilization of α-FeO nanoparticles with xanthan gum (XG) biopolymer has been synthesized in this study to be applied as an adsorbent (XGFO) for sequestration of Pb (II). Spectroscopic techniques such as scanning electron microscopy with energy dispersive X-ray (SEM-EDX), Fourier transform infrared (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD), ultraviolet visible (UV-Vis) and X-ray photoelectron spectroscopy (XPS) were adopted for characterizing the solid powder material. The synthesized material was found to be rich in key functional groups such as -COOH and -OH playing important roles in binding the adsorbate particles through ligand-to-metal charge transfer (LMCT). Based on the preliminary results, adsorption experiments were conducted, and the data obtained were applied to four different adsorption isotherm models, viz the Langmuir, Temkin, Freundlich and D-R models. Based on the high values of R and low values of χ, the Langmuir isotherm model was found to be the best model for simulation of data for Pb (II) adsorption by XGFO. The value of maximum monolayer adsorption capacity (Q) was found to be 117.45 mg g at 303 K, 126.23 mg g at 313 K, 145.12 mg g at 323 K and 191.27 mg g at 323 K. The kinetics of the adsorption process of Pb (II) by XGFO was best defined by the pseudo-second-order model. The thermodynamic aspect of the reaction suggested that the reaction is endothermic and spontaneous. The outcomes proved that XGFO can be utilized as an efficient adsorbent material for the treatment of contaminated wastewater.

摘要

社区和工业活动的增加导致了环境平衡的破坏以及通过引入有机和无机污染物对水系统的污染。在各种无机污染物中,铅(II)是一种重金属,具有不可生物降解的特性,并且对人类健康和环境具有最大的毒性。本研究的重点是合成一种高效且环保的吸附材料,该材料可以从废水中去除铅(II)。在本研究中,基于用黄原胶(XG)生物聚合物固定α-FeO纳米颗粒合成了一种绿色功能纳米复合材料,用作吸附剂(XGFO)以螯合铅(II)。采用扫描电子显微镜结合能量色散X射线(SEM-EDX)、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)、X射线衍射(XRD)、紫外可见光谱(UV-Vis)和X射线光电子能谱(XPS)等光谱技术对固体粉末材料进行表征。发现合成材料富含关键官能团,如-COOH和-OH,它们通过配体到金属的电荷转移(LMCT)在结合吸附质颗粒方面发挥重要作用。基于初步结果,进行了吸附实验,并将获得的数据应用于四种不同的吸附等温线模型,即朗缪尔模型、坦金模型、弗伦德利希模型和D-R模型。基于高R值和低χ值,发现朗缪尔等温线模型是模拟XGFO对铅(II)吸附数据的最佳模型。在303 K时最大单层吸附容量(Q)的值为117.45 mg/g,在313 K时为126.23 mg/g,在323 K时为145.12 mg/g,在323 K时为191.27 mg/g。XGFO对铅(II)吸附过程的动力学最好用准二级模型来定义。反应的热力学方面表明该反应是吸热且自发的。结果证明XGFO可作为一种高效的吸附材料用于处理受污染的废水。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7e81/10006926/614d017ae33a/polymers-15-01134-sch001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验