School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China.
Sensors (Basel). 2023 Mar 20;23(6):3282. doi: 10.3390/s23063282.
Aiming at reducing image detail loss and edge blur in the existing nonuniformity correction (NUC) methods, a new visible-image-assisted NUC algorithm based on a dual-discriminator generative adversarial network (GAN) with SEBlock (VIA-NUC) is proposed. The algorithm uses the visible image as a reference for better uniformity. The generative model downsamples the infrared and visible images separately for multiscale feature extraction. Then, image reconstruction is achieved by decoding the infrared feature maps with the assistance of the visible features at the same scale. During decoding, SEBlock, a channel attention mechanism, and skip connection are used to ensure that more distinctive channel and spatial features are extracted from the visible features. Two discriminators based on vision transformer (Vit) and discrete wavelet transform (DWT) were designed, which perform global and local judgments on the generated image from the texture features and frequency domain features of the model, respectively. The results are then fed back to the generator for adversarial learning. This approach can effectively remove nonuniform noise while preserving the texture. The performance of the proposed method was validated using public datasets. The average structural similarity (SSIM) and average peak signal-to-noise ratio (PSNR) of the corrected images exceeded 0.97 and 37.11 dB, respectively. The experimental results show that the proposed method improves the metric evaluation by more than 3%.
针对现有非均匀性校正 (NUC) 方法中存在的图像细节损失和边缘模糊问题,提出了一种新的基于双鉴别器生成对抗网络 (GAN) 的带 SEBlock 的可见光辅助 NUC 算法 (VIA-NUC)。该算法使用可见光图像作为参考,以实现更好的均匀性。生成模型分别对红外和可见光图像进行下采样,以进行多尺度特征提取。然后,通过在同一尺度下利用可见光特征对红外特征图进行解码来实现图像重建。在解码过程中,使用了 SEBlock 通道注意力机制和跳跃连接,以确保从可见光特征中提取出更具区分性的通道和空间特征。设计了两个基于视觉转换器 (Vit) 和离散小波变换 (DWT) 的鉴别器,分别从模型的纹理特征和频域特征对生成的图像进行全局和局部判断。然后将结果反馈给生成器进行对抗学习。该方法可以在保留纹理的同时有效去除非均匀噪声。使用公共数据集验证了所提出方法的性能。校正后图像的平均结构相似性 (SSIM) 和平均峰值信噪比 (PSNR) 分别超过 0.97 和 37.11 dB。实验结果表明,所提出的方法提高了 3%以上的指标评估。