Suppr超能文献

经后路微创钢板接骨术治疗肱骨骨折的尸体研究

Minimally Invasive Plate Osteosynthesis (MIPO) Through the Posterior Approach for the Humerus: A Cadaveric Study.

作者信息

Singh Adhish P, Chauhan Vijendra D, Kumar Sanad, Singh Deepa

机构信息

Orthopedics, Himalayan Institute of Medical Sciences, Swami Rama Himalayan University, Dehradun, IND.

Anatomy, Himalayan Institute of Medical Sciences, Swami Rama Himalayan University, Dehradun, IND.

出版信息

Cureus. 2023 Feb 28;15(2):e35578. doi: 10.7759/cureus.35578. eCollection 2023 Feb.

Abstract

Background Minimally invasive plate osteosynthesis (MIPO) has been effectively used in femur and tibia fractures. MIPO in the humerus is conducted by anterior (most commonly used), lateral, and posterior approaches. However, in the anterior approach, in distal humeral diaphyseal fractures, there is a lack of adequate room for screw placement in the distal fragment for good stability. In such cases, the posterior approach for MIPO may be a propitious treatment method. However, the literature on MIPO using the posterior approach for humeral diaphyseal fractures is limited. This study aimed to evaluate the feasibility of MIPO through the posterior approach and study the association of radial nerve injury with MIPO through the posterior approach for the humerus. Methodology This experimental study was conducted in the Department of Orthopedics, Himalayan Institute of Medical Sciences, Dehradun, Uttarakhand, India, and 20 cadaveric arms (10 right and 10 left) of 11 embalmed (formalin) cadavers were included (seven males and four females). Cadavers were placed prone on the dissection table. The posterolateral tip of the acromion and lateral epicondyle of the humerus were used as bony landmarks that were marked under C-Arm (Ziehm Imaging, Orlando, FL, USA) using K wires (Kirschner wires, Surgical Holdings, Essex, UK). Two incisions on the posterior part of the arm were made, and the radial nerve was identified at the proximal incision. After creating a submuscular tunnel, a 3.5 mm extraarticular distal humeral locking compression plate (LCP) was introduced over the posterior surface of the humerus and fixed to the humerus distally with one screw and then adjusted proximally and fixed to the humerus with another screw in the proximal window, followed by placement of couple more screws under C-Arm. After plate fixation, the dissection was completed to meticulously explore the radial nerve. The radial nerve was examined thoroughly for any injury sustained after completion of dissection, from the triangular interval to the lateral intermuscular septum where the nerve enters the anterior chamber. The position of the radial nerve with respect to plate holes was noted. The distance from the posterolateral tip of the acromion to the lateral epicondyle was measured as humeral length. The medial and lateral points where radial nerve passed over the posterior surface of the humerus were measured from the posterolateral tip of the acromion and compared with the humeral length. Results In this study, the radial nerve was lying over the posterior surface of the humerus for a mean distance of 52.161 ± 5.16 mm. The mean distance at which the radial nerve crossed the medial and lateral borders of the posterior surface of the humerus, measured from the posterolateral tip of the acromion, was 118.34 ± 10.86 mm (40.07% of humeral length) and 170 ± 12.30 mm (57.57% of humeral length), respectively, and the mean humeral length in this study was 295.27 ± 17.94 mm. The radial nerve and its branches were found to be intact in all cases. The radial nerve was related to the fifth, sixth, and seventh holes, with the nerve lying most commonly over the sixth hole (3.5 mm extraarticular distal humerus locking plate). Conclusions The posterior approach of MIPO in humeral fractures is a safe and reliable treatment modality with minimal risk of radial nerve injury. The radial nerve can be safely identified at the spiral groove using the bony landmarks described in our study.

摘要

背景

微创钢板接骨术(MIPO)已有效地应用于股骨和胫骨骨折。肱骨的MIPO可通过前方(最常用)、外侧和后方入路进行。然而,在前方入路中,对于肱骨干远端骨折,远端骨折块缺乏足够的空间来置入螺钉以获得良好的稳定性。在这种情况下,MIPO的后方入路可能是一种合适的治疗方法。然而,关于采用后方入路治疗肱骨干骨折的MIPO的文献有限。本研究旨在评估通过后方入路进行MIPO的可行性,并研究后方入路的MIPO与肱骨桡神经损伤之间的关系。

方法

本实验研究在印度北阿坎德邦德拉敦市喜马拉雅医学科学研究所骨科进行,纳入了11具经福尔马林防腐处理的尸体的20只尸体手臂(10只右侧和10只左侧)(7名男性和4名女性)。尸体俯卧于解剖台上。以肩峰后外侧尖端和肱骨外上髁作为骨性标志,在美国佛罗里达州奥兰多市的Ziehm Imaging C型臂下用克氏针(英国埃塞克斯郡外科控股公司的克氏针)进行标记。在手臂后部做两个切口,在近端切口处识别桡神经。在创建一个肌下隧道后,将一块3.5mm的肱骨远端关节外锁定加压钢板(LCP)置于肱骨后表面,在远端用一枚螺钉固定于肱骨,然后在近端窗口进行调整并用另一枚螺钉固定于肱骨,随后在C型臂下再置入几枚螺钉。钢板固定后,完成解剖以仔细探查桡神经。从三角肌间隙到神经进入前室的外侧肌间隔,彻底检查解剖完成后桡神经是否有任何损伤。记录桡神经相对于钢板孔的位置。测量从肩峰后外侧尖端到肱骨外上髁的距离作为肱骨长度。测量桡神经在肱骨后表面越过的内侧和外侧点到肩峰后外侧尖端的距离,并与肱骨长度进行比较。

结果

在本研究中,桡神经位于肱骨后表面的平均距离为52.161±5.16mm。从肩峰后外侧尖端测量,桡神经越过肱骨后表面内侧和外侧边界的平均距离分别为118.34±10.86mm(占肱骨长度的40.07%)和170±- 12.30mm(占肱骨长度的57.57%),本研究中的平均肱骨长度为295.27±17.94mm。所有病例中桡神经及其分支均完整。桡神经与第5、6和7个孔相关,神经最常位于第6个孔上方(3.5mm肱骨远端关节外锁定钢板)。

结论

肱骨骨折MIPO的后方入路是一种安全可靠的治疗方式,桡神经损伤风险极小。使用本研究中描述的骨性标志,可在螺旋沟安全识别桡神经。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/3934/10065362/6203aa1e05be/cureus-0015-00000035578-i01.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验