Suppr超能文献

n 型多相伪二元 BiTe-BiS 化合物的室温热电性能:声子散射和能谷过滤的协同效应。

Room-Temperature Thermoelectric Performance of n-Type Multiphase Pseudobinary BiTe-BiS Compounds: Synergic Effects of Phonon Scattering and Energy Filtering.

机构信息

Department of Engineering and Mathematics, Sheffield Hallam University, Sheffield S1 1 WB, U.K.

Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB, U.K.

出版信息

ACS Appl Mater Interfaces. 2023 Apr 19;15(15):19220-19229. doi: 10.1021/acsami.3c01956. Epub 2023 Apr 4.

Abstract

Bismuth telluride-based alloys possess the highest efficiencies for the low-temperature-range (<500 K) applications among thermoelectric materials. Despite significant advances in the efficiency of p-type BiTe-based materials through engineering the electronic band structure by convergence of multiple bands, the ntype pair still suffers from poor efficiency due to a lower number of electron pockets near the conduction band edge than the valence band. To overcome the persistent low efficiency of n-type BiTe-based materials, we have fabricated multiphase pseudobinary BiTe-BiS compounds to take advantages of phonon scattering and energy filtering at interfaces, enhancing the efficiency of these materials. The energy barrier generated at the interface of the secondary phase of BiTeS in the BiTe matrix resulted in a higher Seebeck coefficient and consequently a higher power factor in multiphase compounds than the single-phase alloys. This effect was combined with low thermal conductivity achieved through phonon scattering at the interfaces of finely structured multiphase compounds and resulted in a relatively high thermoelectric figure of merit of ∼0.7 over the 300-550 K temperature range for the multiphase sample of n-type BiTeS, double the efficiency of single-phase BiTe. Our results inform an alternative alloy design to enhance the performance of thermoelectric materials.

摘要

碲化铋基合金在热电材料中具有最高的低温(<500K)效率。尽管通过收敛多个能带来工程电子能带结构,使 p 型 BiTe 基材料的效率得到了显著提高,但 n 型对仍然由于导带边缘附近的电子口袋数量少于价带,因此效率仍然较低。为了克服 n 型 BiTe 基材料持续存在的低效率问题,我们已经制造了多相赝二元 BiTe-BiS 化合物,以利用界面处的声子散射和能量过滤,提高这些材料的效率。在 BiTe 基体中的 BiTeS 次相界面处产生的能垒导致多相化合物的塞贝克系数更高,从而功率因子更高,比单相合金高。这种效应与通过精细结构多相化合物界面的声子散射实现的低热导率相结合,导致 n 型 BiTeS 多相样品在 300-550K 温度范围内的相对较高的热电优值约为 0.7,是单相 BiTe 的两倍。我们的结果为增强热电材料的性能提供了一种替代的合金设计。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/25fb/10119860/191807044ac5/am3c01956_0002.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验