State Key Laboratory of Food Science and Technology, Nanchang University, Nanchang, Jiangxi 330047, China.
Jiangxi Sunshine Dairy Co., Ltd., Nanchang, Jiangxi 330001, China.
Food Res Int. 2023 May;167:112580. doi: 10.1016/j.foodres.2023.112580. Epub 2023 Feb 9.
This study aimed to investigate changes of milk fat globules (MFG) and their membranes after thermal treatments, and further analyzed the relationship between the stability of MFG and interfacial compositions of milk fat globule membrane (MFGM). We characterized the influence of three kinds of thermal treatments on fat globule interfacial components (including interfacial phospholipids and interfacial protein) and physical properties using phospholipidomics and several microscopy techniques. The results showed that size of MFG increased from 2.96 μm to 3.59 μm and ζ-potential decreased from -9.71 mV to -13.23 mV after thermal treatment, suggesting that MFGM was damaged and MFG occurred coalescence. Thermal treatment increased the Young's modulus of MFGM and made membranes more fragile. The abundance of MFGM proteins decreased while casein and β-lactoglobulin increased after thermal treatment. Results of phospholipidomics showed that 27 phospholipid species could be used to distinguish the samples. Pasteurization reduced mainly SM and PC located in the outer bilayer of MFGM, while ultra-pasteurization reduced not only SM and PC but also PI and PE located in the inner leaflet. Based on correlation analysis, the increase in Young's modulus of MFGM during thermal treatment might be related to changes in chemical components on the membrane, suggesting a potential link between the change of MFGM components and fat globule coalescence behavior.
本研究旨在探讨热加工处理后乳脂肪球(MFG)及其膜的变化,并进一步分析 MFG 稳定性与乳脂肪球膜(MFGM)界面成分之间的关系。我们使用磷脂组学和几种显微镜技术来表征三种热处理对脂肪球界面成分(包括界面磷脂和界面蛋白)和物理性质的影响。结果表明,热处理后 MFG 的粒径从 2.96μm 增加到 3.59μm,ζ-电位从-9.71mV 降低到-13.23mV,表明 MFGM 受损,MFG 发生聚结。热处理增加了 MFGM 的杨氏模量,使膜更脆弱。MFGM 蛋白的丰度减少,而酪蛋白和β-乳球蛋白增加。磷脂组学的结果表明,有 27 种磷脂种类可以用来区分样品。巴氏杀菌主要减少 MFGM 外层双层中的 SM 和 PC,而超巴氏杀菌不仅减少 SM 和 PC,还减少 PI 和 PE 在内层。基于相关分析,MFGM 热处理过程中杨氏模量的增加可能与膜上化学组分的变化有关,这表明 MFGM 成分的变化与脂肪球聚结行为之间存在潜在联系。