Department of Physics, Hefei University of Technology, Hefei, Anhui 230009, China.
Department of Chemical Physics, Hefei National Laboratory for Physical Sciences at Microscale, University of Science and Technology of China, Hefei, Anhui 230026, China.
Nanoscale. 2023 May 11;15(18):8447-8455. doi: 10.1039/d3nr00045a.
The magnetic tunnel junction (MTJ), one of the most prominent spintronic devices, has been widely utilized for memory and computation systems. Electrical writing is considered as a practical method to enhance the performance of MTJs with high circuit integration density and ultralow-power consumption. Meanwhile, a large tunneling magnetoresistance (TMR), especially at the non-equilibrium state, is desirable for the improvement of the sensitivity and stability of MTJ devices. However, achieving both aspects efficiently is still challenging. Here, we propose a two-dimensional (2D) MTJ of 1T-MnSe/h-BN/1T-MnSe/h-BN/1T-MnSe with efficient electrical writing, reliable reading operations and high potential to work at room temperature. First, for this proposed MTJ with a symmetrical structure and an antiparallel magnetic state, the degeneracy of the energy could be broken by an electric field, resulting in a 180° magnetization reversal. A first principles study confirms that the magnetization of the center 1T-MnSe layer could be reversed by changing the direction of the electric field, when the magnetic configurations of the two outer 1T-MnSe layers are fixed in the antiparallel state. Furthermore, we report a theoretical spin-related transport investigation of the MTJ at the non-equilibrium state. Thanks to the half-metallicity of 1T-MnSe, TMR ratios reach very satisfactory values of 2.56 × 10% with the magnetization information written by an electric field at room temperature. In addition, the performance of the TMR effect exhibits good stability even when the bias voltage increases gradually. Our theoretical findings show that this proposed MTJ is a promising high performance spintronic device and could promote the design of ultralow-power spintronic devices.
磁性隧道结(MTJ)是最突出的自旋电子器件之一,已广泛应用于存储和计算系统。电写入被认为是提高 MTJ 性能的一种实用方法,具有高电路集成密度和超低功耗。同时,大隧穿磁电阻(TMR),尤其是在非平衡态下,有利于提高 MTJ 器件的灵敏度和稳定性。然而,有效地实现这两个方面仍然具有挑战性。在这里,我们提出了一种具有高效电写入、可靠读取操作和在室温下工作的高潜力的二维(2D)MTJ,其结构为 1T-MnSe/h-BN/1T-MnSe/h-BN/1T-MnSe。首先,对于这个具有对称结构和反平行磁态的建议 MTJ,通过电场可以打破能量的简并性,导致 180°磁化反转。第一性原理研究证实,当两个外 1T-MnSe 层的磁构型固定在反平行状态时,通过改变电场的方向,可以反转中心 1T-MnSe 层的磁化。此外,我们报告了非平衡态 MTJ 的理论自旋相关输运研究。由于 1T-MnSe 的半金属性,在室温下通过电场写入磁化信息时,TMR 比达到了非常令人满意的值 2.56×10%。此外,即使偏置电压逐渐增加,TMR 效应的性能也表现出良好的稳定性。我们的理论研究结果表明,这种建议的 MTJ 是一种很有前途的高性能自旋电子器件,可以促进超低功耗自旋电子器件的设计。