Gandhi Deep B, Al Saeedi Mina, Krier James D, Jiang Kai, Glockner James F, Lerman Lilach O
Division of Nephrology and Hypertension, Mayo Clinic, 200 First Street SW, Rochester, MN 55905, USA.
Department of Diagnostic Radiology, Mayo Clinic, Rochester, MN 55905, USA.
J Clin Med. 2023 Apr 19;12(8):2956. doi: 10.3390/jcm12082956.
Renal fibrosis is an important marker in the progression of chronic kidney disease, and renal biopsy is the current reference standard for detecting its presence. Currently, non-invasive methods have only been partially successful in detecting renal fibrosis. Magnetization transfer imaging (MTI) allows estimates of renal fibrosis but may vary with scanning conditions. We hypothesized that MTI-derived renal fibrosis would be reproducible at 1.5T and 3T MRI and over time in fibrotic kidneys. Fifteen pigs with unilateral renal artery stenosis (RAS, n = 9) or age-matched sham controls (n = 6) underwent MTI-MRI at both 1.5T and 3T 6 weeks post-surgery and again 4 weeks later. Magnetization transfer ratio (MTR) measurements of fibrosis in both kidneys were compared between 1.5T and 3T, and the reproducibility of MTI at the two timepoints was evaluated at 1.5T and 3T. MTR at 3T with 600 Hz offset frequency successfully distinguished between normal, stenotic, and contralateral kidneys. There was excellent reproducibility of MTI at 1.5T and 3T over the two timepoints and no significant differences between MTR measurements at 1.5T and 3T. Therefore, MTI is a highly reproducible technique which is sensitive to detect changes in fibrotic compared to normal kidneys in the RAS porcine model at 3T.
肾纤维化是慢性肾脏病进展的一个重要标志物,肾活检是目前检测其存在的参考标准。目前,非侵入性方法在检测肾纤维化方面仅取得了部分成功。磁化传递成像(MTI)可对肾纤维化进行评估,但可能因扫描条件而异。我们假设MTI得出的肾纤维化在1.5T和3T磁共振成像(MRI)下以及在纤维化肾脏中随时间推移具有可重复性。15只单侧肾动脉狭窄(RAS,n = 9)的猪或年龄匹配的假手术对照组(n = 6)在术后6周时接受了1.5T和3T的MTI-MRI检查,并在4周后再次进行检查。比较了1.5T和3T时两侧肾脏纤维化的磁化传递率(MTR)测量值,并评估了1.5T和3T时两个时间点MTI的可重复性。具有600 Hz偏移频率的3T时的MTR成功区分了正常肾脏、狭窄肾脏和对侧肾脏。在两个时间点上,1.5T和3T时的MTI具有出色的可重复性,并且1.5T和3T时的MTR测量值之间无显著差异。因此,在3T的RAS猪模型中,与正常肾脏相比,MTI是一种高度可重复的技术,对检测纤维化变化敏感。