Suppr超能文献

通过分级磁性花状FeO@C点@MnO纳米复合材料采用同步氧化和吸附工艺从水溶液中去除As(III)

As(III) removal from aqueous solutions using simultaneous oxidation and adsorption process by hierarchically magnetic flower-like FeO@C-dot@MnO nanocomposite.

作者信息

Sahu Uttam Kumar, Chen Jinsong, Ma Hui, Sahu Manoj Kumar, Mandal Sandip, Lai Bo, Pu Shengyan

机构信息

State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Chengdu University of Technology), 1#, Dongsanlu, Erxianqiao, Chengdu, 610059 Sichuan People's Republic of China.

Department of Basic Science and Humanities, GIET University, Gunupur, Odisha 765022 India.

出版信息

J Environ Health Sci Eng. 2022 Dec 29;21(1):47-61. doi: 10.1007/s40201-022-00834-x. eCollection 2023 Jun.

Abstract

In the present study, a magnetic flower-like FeO@C-dot@MnO nanocomposite was synthesized by hydrothermal method and applied for As(III) removal by oxidation and adsorption process. Individual property of the entire material (i.e. magnetic property of FeO, mesoporous surface property of C-dot and oxidation property of MnO) make the composite efficient with good adsorption capacity for As(III) adsorption. The FeO@C-dot@MnO nanocomposite had a saturation magnetization of 26.37 emu/g and it magnetically separated within 40 s. The FeO@C-dot@MnO nanocomposite was able to reduce the 0.5 mg/L concentration of As(III) to 0.001 mg/L in just 150 min at pH 3. Pseudo-second-order kinetic and Langmuir isotherm model agreed with experimental data. The uptake capacity of FeO@C-dot@MnO nanocomposite was 42.68 mg/g. The anions like chloride, sulphate and nitrate did not show any effect on removal but carbonate and phosphate influenced the As(III) removal rate. Regeneration was studied with NaOH and NaClO solution and the adsorbent was used for repeated five cycles above 80% removal capacity. The XPS studies proposed that As(III) first oxidized to As(V) then adsorb on the composite surface. This study shows the potential applicability of FeO@C-dot@MnO nanocomposite to high extent and gives a suitable path for the proficient removal of As(III) from wastewater.

摘要

在本研究中,通过水热法合成了一种磁性花状FeO@C点@MnO纳米复合材料,并将其应用于通过氧化和吸附过程去除As(III)。整个材料的独特性质(即FeO的磁性、C点的介孔表面性质和MnO的氧化性质)使该复合材料对As(III)吸附具有高效且良好的吸附能力。FeO@C点@MnO纳米复合材料的饱和磁化强度为26.37 emu/g,在40秒内可实现磁性分离。FeO@C点@MnO纳米复合材料在pH值为3时,仅需150分钟就能将0.5 mg/L浓度的As(III)降低至0.001 mg/L。准二级动力学和朗缪尔等温线模型与实验数据相符。FeO@C点@MnO纳米复合材料的吸附容量为42.68 mg/g。氯离子、硫酸根离子和硝酸根离子等阴离子对去除效果没有任何影响,但碳酸根离子和磷酸根离子会影响As(III)的去除率。用氢氧化钠和次氯酸钠溶液研究了再生情况,该吸附剂在去除容量高于80%的情况下可重复使用五个循环。X射线光电子能谱研究表明,As(III)首先氧化为As(V),然后吸附在复合材料表面。本研究高度显示了FeO@C点@MnO纳米复合材料的潜在适用性,并为从废水中高效去除As(III)提供了一条合适的途径。

相似文献

本文引用的文献

7
Environmental source of arsenic exposure.砷暴露的环境来源。
J Prev Med Public Health. 2014 Sep;47(5):253-7. doi: 10.3961/jpmph.14.036. Epub 2014 Sep 11.

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验