Beijing Key Laboratory of Environmental and Viral Oncology, Faculty of Environment and Life, Beijing University of Technology, Beijing 100124, China.
Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China.
Environ Sci Technol. 2023 Nov 28;57(47):18834-18845. doi: 10.1021/acs.est.2c07779. Epub 2023 May 14.
Dichloroacetonitrile (DCAN) as one of the potentially prioritized regulated DBPs has drawn great attention; however, understanding its formation, especially the C-C bond cleavage mechanisms, is limited. In this study, DCAN formation mechanisms from long-chain primary amines, amino acids, and dipeptides during chlorination were investigated by a combined computational and experimental approach. The results indicate that nitriles initially generate for all of the above precursors, then they undergo β--hydroxylation or/and α--chlorination processes, and finally, DCAN is produced through the C-C bond cleavage. For the first time, the underlying mechanism of the C-C bond cleavage was unraveled to be electron transfer from the O anion into its attached C atom in the chlorinated nitriles, leading to the strongly polarized C-C bond heterocleavage and DCAN formation. Moreover, DCAN molar yields of precursors studied in the present work were found to be determined by their groups at the γ-site of the amino group, where the carbonyl group including -CO, -COR, and -CONHR, the aromatic group, and the -OH group can all dramatically facilitate DCAN formation by skipping over or promoting the time-consuming β--hydroxylation process and featuring relatively lower activation free energies in the C-C bond cleavage. Importantly, 4-amino-2-hydroxybutyric acid was revealed to possess the highest DCAN yield among all the known aliphatic long-chain precursors to date during chlorination. Additionally, enonitriles, (chloro-)isocyanates, and nitriles can be generated during DCAN formation and should be of concern due to their high toxicities.
二氯乙腈(DCAN)作为潜在优先控制的 DBPs 之一受到了极大关注;然而,其形成机制,尤其是 C-C 键断裂机制的理解还很有限。本研究通过组合计算和实验方法,考察了氯化过程中长链伯胺、氨基酸和二肽形成 DCAN 的机制。结果表明,所有上述前体物均首先生成腈,然后经历β-羟化或/和α-氯化过程,最后通过 C-C 键断裂生成 DCAN。首次揭示了 C-C 键断裂的机制,即氯化腈中 O 阴离子向其连接的 C 原子的电子转移,导致强烈极化的 C-C 键异裂和 DCAN 的形成。此外,研究工作中发现,所研究的前体物的 DCAN 摩尔产率取决于其γ位氨基上的基团,其中羰基(-CO、-COR 和 -CONHR)、芳基和-OH 基团可以通过跳过或促进耗时的β-羟化过程,以及在 C-C 键断裂中具有较低的活化自由能,显著促进 DCAN 的形成。重要的是,在所有已知的氯化脂肪族长链前体物中,4-氨基-2-羟基丁酸被揭示具有最高的 DCAN 产率。此外,在 DCAN 形成过程中会生成烯腈、(氯)异氰酸酯和腈,由于其高毒性,应予以关注。