Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, No. 9 Wenyuan Road, Nanjing 210023, P. R. China.
Cixi Institute of Biomedical Engineering, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences (CAS), No. 1219 Zhongguan West Road, Ningbo 315300, P. R. China.
Anal Chem. 2023 Jun 13;95(23):8906-8913. doi: 10.1021/acs.analchem.3c00601. Epub 2023 Jun 2.
Developing highly active and sensitive nanozymes for biothiol analysis is of vital significance due to their essential roles in disease diagnosis. Herein, two metal ion-doped carbon dots (M-CDs) with high peroxidase-like activity were designed and prepared for biothiol detection and identification through the colorimetric sensor array technique. The two M-CDs can strongly catalyze the decomposition of HO, accompanied by color changes of 3,3',5,5'-tetramethylbenzidine (TMB) from colorless to blue, indicating peroxidase-mimicking activities of M-CDs. Compared with pure carbon dots (CDs), M-CDs exhibited enhanced peroxidase-like activity owing to the synergistic effect between metal ions and CDs. However, due to the strong binding affinity between biothiols and metal ions, the catalytic activities of M-CDs could be inhibited by different biothiols to diverse degrees. Therefore, using TMB as a chromogenic substrate in the presence of HO, the developed colorimetric sensor array can form differential fingerprints for the three most important biothiols (i.e., cysteine (Cys), homocysteine (Hcy), and glutathione (GSH)), which can be accurately discriminated through pattern recognition methods (i.e., hierarchical clustering analysis (HCA) and principal component analysis (PCA)) with a detection limit of 5 nM. Moreover, the recognition of a single biothiol with various concentrations and biothiol mixtures was also realized. Furthermore, actual samples such as cells and sera can also be well distinguished by the as-fabricated sensor array, demonstrating its potential in disease diagnosis.
由于生物硫醇在疾病诊断中的重要作用,开发高活性和高灵敏度的纳米酶用于生物硫醇分析具有重要意义。在此,设计并制备了两种具有高过氧化物酶样活性的金属离子掺杂碳点(M-CDs),通过比色传感器阵列技术用于生物硫醇的检测和鉴定。两种 M-CDs 可以强烈催化 HO 的分解,伴随着 3,3',5,5'-四甲基联苯胺(TMB)从无色变为蓝色的颜色变化,表明 M-CDs 具有过氧化物酶模拟活性。与纯碳点(CDs)相比,由于金属离子和 CDs 之间的协同作用,M-CDs 表现出增强的过氧化物酶样活性。然而,由于生物硫醇与金属离子之间的强结合亲和力,不同生物硫醇对 M-CDs 的催化活性的抑制程度不同。因此,在存在 HO 的情况下,使用 TMB 作为显色底物,开发的比色传感器阵列可以为三种最重要的生物硫醇(即半胱氨酸(Cys)、同型半胱氨酸(Hcy)和谷胱甘肽(GSH))形成差分指纹,通过模式识别方法(即层次聚类分析(HCA)和主成分分析(PCA))可以准确区分,检测限为 5 nM。此外,还实现了对各种浓度的单个生物硫醇和生物硫醇混合物的识别。此外,通过所制备的传感器阵列还可以很好地区分实际样品,如细胞和血清,证明了其在疾病诊断中的应用潜力。