Department of Industrial and Food Microbiology, The Faculty of Food Science, University of Warmia and Mazury in Olsztyn, Plac Cieszyński 1, 10-726 Olsztyn, Poland.
Department of Human Nutrition, The Faculty of Food Science, University of Warmia and Mazury in Olsztyn, Słoneczna 45 f, 10-709 Olsztyn, Poland.
Colloids Surf B Biointerfaces. 2023 Aug;228:113391. doi: 10.1016/j.colsurfb.2023.113391. Epub 2023 Jun 2.
This work aimed to determine the ability of Listeria innocua (L.i.) to colonize eight materials found in food-processing and packaging settings and to evaluate the viability of the sessile cells. We also selected four commonly used phytochemicals (trans-cinnamaldehyde, eugenol, citronellol, and terpineol) to examine and compare their efficacies against L.i. on each surface. Biofilms were also deciphered in chamber slides using confocal laser scanning microscopy to learn more about how phytochemicals affect L.i. The materials tested were silicone rubber (Si), polyurethane (PU), polypropylene (PP), polytetrafluoroethylene (PTFE), stainless steel 316 L (SS), copper (Cu), polyethylene terephthalate (PET), and borosilicate glass (GL). L.i. colonized Si and SS abundantly, followed by PU, PP, Cu, PET, GL, and PTFE surfaces. The live/dead status ranged from 65/35% for Si to 20/80% for Cu, and the estimates of cells unable to grow on Cu were the highest, reaching even 43%. Cu was also characterized by the highest degree of hydrophobicity (ΔG = -81.5 mJ/m). Eventually, it was less prone to attachment, as we could not recover L.i. after treatments with control or phytochemical solutions. The PTFE surface demonstrated the least total cell densities and fewer live cells (31%) as compared to Si (65%) or SS (nearly 60%). It also scored high in hydrophobicity degree (ΔG = -68.9 mJ/m) and efficacy of phytochemical treatments (on average, biofilms were reduced by 2.1 log CFU/cm). Thus, the hydrophobicity of surface materials plays a role in cell viability, biofilm formation, and then biofilm control and could be the prevailing parameter when designing preventive measures and interventions. As for phytochemical comparison, trans-cinnamaldehyde displayed greater efficacies, with the highest reductions seen on PET and Si (4.6 and 4.0 log CFU/cm). The biofilms in chamber slides exposed to trans-cinnamaldehyde revealed the disrupted organization to a greater extent than other molecules. This may help establish better interventions via proper phytochemical selection for incorporation in environment-friendly disinfection approaches.
本研究旨在确定无害李斯特菌(Listeria innocua,简称 L.i.)在食品加工和包装环境中八种材料上的定植能力,并评估其固着细胞的活力。我们还选择了四种常用的植物化学物质(反式肉桂醛、丁香酚、香茅醇和萜品醇),以研究它们在每种表面上对 L.i.的功效。我们还使用共聚焦激光扫描显微镜在腔室载玻片上对生物膜进行解码,以了解植物化学物质如何影响 L.i.。测试的材料包括硅橡胶(Si)、聚氨酯(PU)、聚丙烯(PP)、聚四氟乙烯(PTFE)、不锈钢 316L(SS)、铜(Cu)、聚对苯二甲酸乙二醇酯(PET)和硼硅酸盐玻璃(GL)。L.i.在 Si 和 SS 上大量定植,其次是 PU、PP、Cu、PET、GL 和 PTFE 表面。活/死状态范围从 Si 的 65/35%到 Cu 的 20/80%,无法在 Cu 上生长的细胞估计最高,甚至达到 43%。Cu 的疏水性也最强(ΔG = -81.5 mJ/m)。最终,它不易附着,因为我们无法在使用对照或植物化学物质溶液处理后回收 L.i.。与 Si(65%)或 SS(近 60%)相比,PTFE 表面的总细胞密度最低,活细胞(31%)也最少。它的疏水性程度(ΔG = -68.9 mJ/m)和植物化学物质处理的功效也很高(平均而言,生物膜减少了 2.1 log CFU/cm)。因此,表面材料的疏水性在细胞活力、生物膜形成以及随后的生物膜控制中起着作用,并且在设计预防措施和干预措施时可能是主要参数。至于植物化学物质的比较,反式肉桂醛表现出更大的功效,在 PET 和 Si 上的减少量最大(4.6 和 4.0 log CFU/cm)。暴露于反式肉桂醛的腔室载玻片上的生物膜显示出比其他分子更大程度的组织破坏。这可能有助于通过适当的植物化学物质选择来建立更好的干预措施,以纳入环保型消毒方法。