Feijoo Patricia, Marín Anna, Samaniego-Aguilar Kerly, Sánchez-Safont Estefanía, Lagarón José M, Gámez-Pérez José, Cabedo Luis
Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain.
Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish National Research Council (CSIC), Calle Catedrático Agustín Escardino Benlloch 7, 46980 Paterna, Spain.
Polymers (Basel). 2023 May 27;15(11):2481. doi: 10.3390/polym15112481.
Poly(3-hydroxybutyrate--3-hydroxyvalerate) (PHBV) has gained attention as a possible substitute for conventional polymers that could be integrated into the organic recycling system. Biocomposites with 15% of pure cellulose (TC) and woodflour (WF) were prepared to analyze the role of lignin on their compostability (58 °C) by tracking the mass loss, CO evolution, and the microbial population. Realistic dimensions for typical plastic products (400 µm films), as well as their service performance (thermal stability, rheology), were taken into account in this hybrid study. WF showed lower adhesion with the polymer than TC and favored PHBV thermal degradation during processing, also affecting its rheological behavior. Although all materials disintegrated in 45 days and mineralized in less than 60 days, lignin from woodflour was found to slow down the bioassimilation of PHBV/WF by limiting the access of enzymes and water to easier degradable cellulose and polymer matrix. According to the highest and the lowest weight loss rates, TC incorporation allowed for higher mesophilic bacterial and fungal counts, while WF seemed to hinder fungal growth. At the initial steps, fungi and yeasts seem to be key factors in facilitating the later metabolization of the materials by bacteria.
聚(3-羟基丁酸酯-3-羟基戊酸酯)(PHBV)作为一种可能替代传统聚合物的材料受到关注,它可以融入有机回收系统。制备了含有15%纯纤维素(TC)和木粉(WF)的生物复合材料,通过跟踪质量损失、二氧化碳释放和微生物种群来分析木质素对其在58℃下可堆肥性的作用。在这项综合研究中考虑了典型塑料制品的实际尺寸(400微米薄膜)及其使用性能(热稳定性、流变学)。与TC相比,WF与聚合物的粘附性较低,并且在加工过程中有利于PHBV的热降解,也影响其流变行为。尽管所有材料在45天内分解并在不到60天内矿化,但发现木粉中的木质素通过限制酶和水进入更易降解的纤维素和聚合物基质,减缓了PHBV/WF的生物同化作用。根据最高和最低失重率,加入TC可使嗜温细菌和真菌数量增加,而WF似乎会阻碍真菌生长。在初始阶段,真菌和酵母似乎是促进材料后期被细菌代谢的关键因素。