Bi-axial flexure testing method for dental composites requires standardization.
作者信息
Kumar Naresh, Rahman Sehrish, Khoso Muhammad Hassan, Zafar Muhammad S
机构信息
Department of Science of Dental Materials, Dow University of Health Sciences, Karachi 74200, Pakistan.
Department of Restorative, Dentistry, Taibah University, Almadinah Almunawwarah, KSA.
出版信息
J Taibah Univ Med Sci. 2023 Jun 1;18(6):1384-1385. doi: 10.1016/j.jtumed.2023.05.017. eCollection 2023 Dec.
Abstract
摘要
相似文献
1
Bi-axial flexure testing method for dental composites requires standardization.牙科复合材料的双轴弯曲测试方法需要标准化。
J Taibah Univ Med Sci. 2023 Jun 1;18(6):1384-1385. doi: 10.1016/j.jtumed.2023.05.017. eCollection 2023 Dec.
2
The reliability in flexural strength testing of a novel dental composite.一种新型牙科复合材料弯曲强度测试的可靠性
J Dent. 2003 Nov;31(8):549-57. doi: 10.1016/s0300-5712(03)00110-6.
3
The effect of core:dentin thickness ratio on the bi-axial flexure strength and fracture mode and origin of bilayered dental ceramic composites.核心与牙本质厚度比对双层牙科陶瓷复合材料双轴弯曲强度、断裂模式及断裂起源的影响。
Dent Mater. 2005 Feb;21(2):164-71. doi: 10.1016/j.dental.2004.01.005.
4
Influence of test method on failure stress of brittle dental materials.测试方法对脆性牙科材料断裂应力的影响。
J Dent Res. 1990 Dec;69(12):1791-9. doi: 10.1177/00220345900690120201.
5
Effect of loading conditions on bi-axial flexure strength of dental cements.加载条件对牙科水门汀双轴弯曲强度的影响。
Dent Mater. 1992 Mar;8(2):100-4. doi: 10.1016/0109-5641(92)90063-i.
6
Performance of the experimental resins and dental nanocomposites at varying deformation rates.不同变形速率下实验性树脂和牙科纳米复合材料的性能
J Investig Clin Dent. 2014 Aug;5(3):237-42. doi: 10.1111/jicd.12043. Epub 2013 Jun 14.
7
The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material.表面粗糙度对氧化铝增强全瓷冠材料弯曲强度的影响。
J Dent. 2002 May;30(4):153-60. doi: 10.1016/s0300-5712(02)00012-x.
8
Cuspal flexure of composite-restored typodont teeth and correlation with polymerization shrinkage values.复合树脂修复的牙体牙尖曲度的柔性与聚合收缩值的相关性。
Dent Mater. 2018 Jan;34(1):152-160. doi: 10.1016/j.dental.2017.09.019. Epub 2017 Oct 20.
9
[Bi-axial flexure strength and fracture mode of alumina glass-infiltrated core/veneer ceramic composites].[氧化铝玻璃渗透型芯/饰面陶瓷复合材料的双轴弯曲强度及断裂模式]
Shanghai Kou Qiang Yi Xue. 2010 Apr;19(2):192-5.
10
Cuspal flexure, depth-of-cure, and bond integrity of bulk-fill composites.大块充填复合树脂的牙尖弯曲度、固化深度和粘结完整性。
Pediatr Dent. 2014 Nov-Dec;36(7):468-73.
本文引用的文献
1
Pre-cementation treatment of glass-ceramics with vacuum impregnated resin coatings.预粘结处理的玻璃陶瓷与真空浸渍树脂涂层。
Dent Mater. 2023 May;39(5):492-496. doi: 10.1016/j.dental.2023.02.002. Epub 2023 Mar 28.
2
Effects of Color Modifier on Degree of Monomer Conversion, Biaxial Flexural Strength, Surface Microhardness, and Water Sorption/Solubility of Resin Composites.颜色调节剂对树脂复合材料单体转化率、双轴弯曲强度、表面显微硬度及吸水性/溶解性的影响
Polymers (Basel). 2021 Nov 11;13(22):3902. doi: 10.3390/polym13223902.
3
Flexural strength and microhardness of bulk-fill restorative materials.块状充填修复材料的挠曲强度和显微硬度。
J Esthet Restor Dent. 2021 Jun;33(4):628-635. doi: 10.1111/jerd.12727. Epub 2021 Mar 5.
4
Influence of curing duration and mixing techniques of bulk fill resin composites on bi-axial flexural strength and degree of conversion.各固化时间和混合技术对大体积充填树脂复合材料双轴弯曲强度和转化率的影响。
J Appl Biomater Funct Mater. 2020 Jan-Dec;18:2280800020975721. doi: 10.1177/2280800020975721.
5
Strength-limiting damage and its mitigation in CAD-CAM zirconia-reinforced lithium-silicate ceramics machined in a fully crystallized state.在完全结晶状态下加工的 CAD-CAM 氧化锆增强锂硅酸盐陶瓷的强度限制损伤及其缓解。
Dent Mater. 2020 Dec;36(12):1557-1565. doi: 10.1016/j.dental.2020.09.012. Epub 2020 Oct 3.
6
Effect of calcium orthophosphate: Reinforcing glass ratio and prolonged water storage on flexural properties of remineralizing composites.磷酸钙的作用：增强玻璃比例和延长水储存时间对再矿化复合材料弯曲性能的影响。
J Mech Behav Biomed Mater. 2020 Apr;104:103637. doi: 10.1016/j.jmbbm.2020.103637. Epub 2020 Jan 13.
7
Effects of deformation rate variation on biaxial flexural properties of dental resin composites.变形速率变化对牙科树脂复合材料双轴弯曲性能的影响。
J Taibah Univ Med Sci. 2018 Jun 6;13(4):319-326. doi: 10.1016/j.jtumed.2018.04.012. eCollection 2018 Aug.
8
Flexural properties of resin composites: influence of specimen dimensions and storage conditions.树脂复合材料的弯曲性能：试件尺寸和存储条件的影响。
Dent Mater J. 2013;32(2):228-32. doi: 10.4012/dmj.2012-271.
9
An evalution of compressive strength of newer nanocomposite: An in vitro study.新型纳米复合材料抗压强度的评估：一项体外研究。
J Conserv Dent. 2011 Jan;14(1):36-9. doi: 10.4103/0972-0707.80734.
10
Hardness and diametral tensile strength of a hybrid composite resin polymerized with different modes and immersed in ethanol or distilled water media.采用不同聚合方式聚合并浸泡于乙醇或蒸馏水介质中的混合复合树脂的硬度和径向拉伸强度。
Dent Mater. 2005 Dec;21(12):1098-103. doi: 10.1016/j.dental.2004.11.010.
Zotero 插件