Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois, USA.
Nick Holonyak, Jr., Micro and Nanotechnology Laboratory, University of Illinois at Urbana-Champaign, Urbana, Illinois, USA.
J Biomed Mater Res A. 2023 Dec;111(12):1850-1865. doi: 10.1002/jbm.a.37582. Epub 2023 Jun 19.
Stress shielding and osseointegration are two main challenges in bone regeneration, which have been targeted successfully by chemical and physical surface modification methods. Direct irradiation synthesis (DIS) is an energetic ion irradiation method that generates self-organized nanopatterns conformal to the surface of materials with complex geometries (e.g., pores on a material surface). This work exposes porous titanium samples to energetic argon ions generating nanopatterning between and inside pores. The unique porous architected titanium (Ti) structure is achieved by mixing Ti powder with given amounts of spacer NaCl particles (vol % equal to 30%, 40%, 50%, 60%, and 70%), compacted and sintered, and combined with DIS to generate a porous Ti with bone-like mechanical properties and hierarchical topography to enhance Ti osseointegration. The porosity percentages range between 25% and 30% using 30 vol % NaCl space-holder (SH) volume percentages to porosity rates of 63%-68% with SH volume of 70 vol % NaCl. Stable and reproducible nanopatterning on the flat surface between pores, inside pits, and along the internal pore walls are achieved, for the first time on any porous biomaterial. Nanoscale features were observed in the form of nanowalls and nanopeaks of lengths between 100 and 500 nm, thicknesses of 35-nm and heights between 100 and 200 nm on average. Bulk mechanical properties that mimic bone-like structures were observed along with increased wettability (by reducing contact values). Nano features were cell biocompatible and enhanced in vitro pre-osteoblast differentiation and mineralization. Higher alkaline phosphatase levels and increased calcium deposits were observed on irradiated 50 vol % NaCl samples at 7 and 14 days. After 24 h, nanopatterned porous samples decreased the number of attached macrophages and the formation of foreign body giant cells, confirming nanoscale tunability of M1-M2 immuno-activation with enhanced osseointegration.
应力屏蔽和骨整合是骨再生的两个主要挑战,化学和物理表面改性方法已成功针对这两个问题。直接辐照合成(DIS)是一种高能离子辐照方法,可在具有复杂几何形状的材料表面(例如材料表面上的孔)上生成与表面一致的自组织纳米图案。这项工作使多孔钛样品暴露于高能氩离子下,在孔之间和内部产生纳米图案化。独特的多孔架构钛(Ti)结构是通过将 Ti 粉末与一定量的间隔 NaCl 颗粒(体积%等于 30%、40%、50%、60%和 70%)混合、压实和烧结,并与 DIS 结合来实现的,生成具有骨样机械性能和分级形貌的多孔 Ti,以增强 Ti 与骨的整合。使用 30 vol%NaCl 间隔物(SH)体积百分比的多孔率范围在 25%到 30%之间,SH 体积为 70 vol%NaCl 的多孔率为 63%-68%。首次在任何多孔生物材料上实现了在孔之间的平坦表面、内部凹坑中和沿内部孔壁上稳定且可重复的纳米图案化。观察到纳米级特征呈纳米壁和纳米峰的形式,长度在 100 到 500nm 之间,厚度为 35nm,平均高度在 100 到 200nm 之间。观察到具有类似骨结构的整体机械性能,同时提高了润湿性(通过降低接触值)。纳米特征与体外成骨前细胞分化和矿化增强具有细胞生物相容性。在 7 和 14 天时,观察到辐照 50 vol%NaCl 样品的碱性磷酸酶水平升高和钙沉积增加。在 24 小时后,纳米图案化多孔样品减少了附着的巨噬细胞数量和异物巨细胞的形成,证实了通过增强骨整合来实现 M1-M2 免疫激活的纳米级可调性。