Ellrich Julius A, Ehlers Sonja M, Furukuma Shunji, Pogoda Bernadette, Koop Jochen H E
Shelf Sea System Ecology, Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research, 27498 Helgoland, Germany.
Department of Animal Ecology, Federal Institute of Hydrology, 56068 Koblenz, Germany.
Sci Total Environ. 2023 Oct 15;895:165073. doi: 10.1016/j.scitotenv.2023.165073. Epub 2023 Jun 22.
Plastic forms, including plastiglomerate, pyroplastic, plasticrusts, anthropoquinas, plastistone and plastitar, were recorded worldwide. These plastic forms derive from geochemical or geophysical interactions such as heat-induced plastic fusion with rock in campfires, incomplete plastic combustion, water motion-driven plastic abrasion in the rocky intertidal zone, plastic deposition in hardened sediments and plastic bonding with tar. Thereby, these interactions can profoundly influence the fate of plastics in the environment. This study characterized three novel plastic forms (plasticoncrete, plastimetal and plastisessiles) discovered on Helgoland island (North Sea). Plasticoncrete consisted of common polyethylene (PE) and polypropylene (PP) fibers hardened in concrete. Plastimetal included PE fibers rusted with metal. Plastisessiles consisted of PE fibers attached to benthic substrates by sessile invertebrates (oysters and polychaetes). Plasticoncrete and plastimetal are the first plastic forms composed of two man-made materials. Plastisessiles show that plastic forms not only result from human- or environment-mediated interactions but also from biological interactions between invertebrates and plastic. All plastic forms (bulk density ≥ 1.4 g/cm) sunk during floating tests and hardly changed their positions during a 13-day field experiment and 153- to 306-day field monitorings, indicating their local formation, limited mobility and longevity. Still, experimentally detached plastic fibers floated, confirming that the formation of these plastic forms influences the fate of plastic fibers in the environment. Furthermore, the experiment showed that plasticoncrete got deposited in beach sand under wavy and windy conditions, indicating that coastal waves and onshore winds drive plasticoncrete deposition in coastal sediments. We also provide first records of plasticoncrete on Mallorca island (Mediterranean Sea) and plastimetal on Hikoshima island (Sea of Japan), respectively, which show that these plastic forms are no local phenomena. Thereby, our study contributes to the growing fundamental knowledge of plastic forms that is essential to understand the role and fate of these pollutants in coastal habitats worldwide.
塑料形态,包括塑料团聚体、热塑性塑料、塑料锈、人工石、塑料石和塑料焦油,在全球范围内都有记录。这些塑料形态源自地球化学或地球物理相互作用,例如篝火中热诱导塑料与岩石的熔合、不完全塑料燃烧、岩石潮间带水动力驱动的塑料磨损、硬化沉积物中的塑料沉积以及塑料与焦油的结合。因此,这些相互作用会深刻影响环境中塑料的归宿。本研究对在黑尔戈兰岛(北海)发现的三种新型塑料形态(塑料混凝土、塑料金属和塑料固着物)进行了表征。塑料混凝土由在混凝土中硬化的普通聚乙烯(PE)和聚丙烯(PP)纤维组成。塑料金属包括与金属锈蚀在一起的PE纤维。塑料固着物由无柄无脊椎动物(牡蛎和多毛类动物)附着在底栖基质上的PE纤维组成。塑料混凝土和塑料金属是首批由两种人造材料组成的塑料形态。塑料固着物表明,塑料形态不仅源于人类或环境介导的相互作用,还源于无脊椎动物与塑料之间的生物相互作用。所有塑料形态(堆积密度≥1.4克/立方厘米)在漂浮试验中下沉,在为期13天的野外实验和153至306天的野外监测期间位置几乎没有变化,表明它们是就地形成的,迁移性有限且寿命较长。不过,实验中分离出的塑料纤维会漂浮,这证实了这些塑料形态的形成会影响环境中塑料纤维的归宿。此外,实验表明,在波浪和有风的条件下,塑料混凝土会沉积在海滩沙子中,这表明沿岸波浪和向岸风会推动塑料混凝土在海岸沉积物中的沉积。我们还分别首次记录了马略卡岛(地中海)的塑料混凝土和彦岛(日本海)上的塑料金属,这表明这些塑料形态并非局部现象。因此,我们的研究有助于增加对塑料形态的基础知识了解,这对于理解这些污染物在全球沿海栖息地中的作用和归宿至关重要。