PMMA Cranioplasty Making by Using Open-Source CAD Software, PLA Printers, and Silicone Rubber Molds: Technical Note with Two Illustrative Cases.
作者信息
Ashraf Mohammad, Zahra Shah Gul, Farooq Minaam, Choudhary Nabeel, Ashraf Naveed
机构信息
Wolfson School of Medicine, University of Glasgow, Scotland, United Kingdom.
School of Medicine, King Edward Medical University, Lahore, Punjab, Pakistan.
出版信息
Asian J Neurosurg. 2023 Jun 6;18(2):420-422. doi: 10.1055/s-0043-1768604. eCollection 2023 Jun.
Abstract
摘要
相似文献
1
PMMA Cranioplasty Making by Using Open-Source CAD Software, PLA Printers, and Silicone Rubber Molds: Technical Note with Two Illustrative Cases.
Asian J Neurosurg. 2023 Jun 6;18(2):420-422. doi: 10.1055/s-0043-1768604. eCollection 2023 Jun.
2
PMMA Cranioplasty Making by Using Оpen-Source CAD Software, PLA Printers, and Silicone Rubber Molds: Technical Note with Two Illustrative Cases.
Asian J Neurosurg. 2022 Aug 24;17(2):317-323. doi: 10.1055/s-0042-1750812. eCollection 2022 Jun.
3
Early experience with patient-specific low-cost 3D-printed polymethylmethacrylate cranioplasty implants in a lower-middle-income-country: Technical note and economic analysis.
Surg Neurol Int. 2022 Jun 23;13:270. doi: 10.25259/SNI_250_2022. eCollection 2022.
4
Customized Polymethylmethacrylate Cranioplasty Implants Using 3-Dimensional Printed Polylactic Acid Molds: Technical Note with 2 Illustrative Cases.
World Neurosurg. 2017 Sep;105:971-979.e1. doi: 10.1016/j.wneu.2017.05.007. Epub 2017 May 11.
5
Patient specific Polymethyl methacrylate customised cranioplasty using 3D printed silicone moulds: Technical note.
Int J Med Robot. 2022 Apr;18(2):e2353. doi: 10.1002/rcs.2353. Epub 2021 Nov 24.
6
Cost-Effective Cranioplasty Utilizing 3D Printed Molds: A Canadian Single-Center Experience.
Can J Neurol Sci. 2022 Mar;49(2):196-202. doi: 10.1017/cjn.2021.57. Epub 2021 Apr 5.
7
Cold-Injection Molded Gentamicin-Impregnated Polymethyl Methacrylate Implants for Cranioplasty.
Oper Neurosurg (Hagerstown). 2021 Sep 15;21(4):248-257. doi: 10.1093/ons/opab257.
8
Three-Dimensional Printed Polymethylmethacrylate Casting Molds for Posterior Fossa Reconstruction in the Surgical Treatment of Chiari I Malformation: Technical Note and Illustrative Cases.
World Neurosurg. 2019 Sep;129:148-156. doi: 10.1016/j.wneu.2019.05.191. Epub 2019 May 29.
9
Design and manufacturing of cranioplasty implants by 3-axis cnc milling.
Technol Health Care. 2002;10(5):413-23. doi: 10.1046/j.1365-2524.2002.03834.x.
10
Customized cranioplasty implants using three-dimensional printers and polymethyl-methacrylate casting.
J Korean Neurosurg Soc. 2012 Dec;52(6):541-6. doi: 10.3340/jkns.2012.52.6.541. Epub 2012 Dec 31.
本文引用的文献
1
PMMA Cranioplasty Making by Using Оpen-Source CAD Software, PLA Printers, and Silicone Rubber Molds: Technical Note with Two Illustrative Cases.
Asian J Neurosurg. 2022 Aug 24;17(2):317-323. doi: 10.1055/s-0042-1750812. eCollection 2022 Jun.
2
Early experience with patient-specific low-cost 3D-printed polymethylmethacrylate cranioplasty implants in a lower-middle-income-country: Technical note and economic analysis.
Surg Neurol Int. 2022 Jun 23;13:270. doi: 10.25259/SNI_250_2022. eCollection 2022.
Zotero 插件