CSIRO Environment, Sydney, New South Wales, Australia.
Chevron Australia, Perth, Western Australia, Australia.
Integr Environ Assess Manag. 2024 Mar;20(2):498-517. doi: 10.1002/ieam.4817. Epub 2023 Aug 28.
Produced water (PW) generated by Australian offshore oil and gas activities is typically discharged to the ocean after treatment. These complex mixtures of organic and inorganic compounds can pose significant environmental risk to receiving waters, if not managed appropriately. Oil and gas operators in Australia are required to demonstrate that environmental impacts of their activity are managed to levels that are as low as reasonably practicable, for example, through risk assessments comparing predicted no-effect concentrations (PNECs) with predicted environmental concentrations of PW. Probabilistic species sensitivity distribution (SSD) approaches are increasingly being used to derive PW PNECs and subsequently calculating dilutions of PW (termed "safe" dilutions) required to protect a nominated percentage of species in the receiving environment (e.g., 95% and 99% or PC95 and PC99, respectively). Limitations associated with SSDs include fitting a single model to small (six to eight species) data sets, resulting in large uncertainty (very wide 95% confidence limits) in the region associated with PC99 and PC95 results. Recent advances in SSD methodology, in the form of model averaging, claim to overcome some of these limitations by applying the average model fit of multiple models to a data set. We assessed the advantages and limitations of four different SSD software packages for determining PNECs for five PWs from a gas and condensate platform off the North West Shelf of Australia. Model averaging reduced occurrences of extreme uncertainty around PC95 and PC99 values compared with single model fitting and was less prone to the derivation of overly conservative PC99 and PC95 values that resulted from lack of fit to single models. Our results support the use of model averaging for improved robustness in derived PNEC and subsequent "safe" dilution values for PW discharge management and risk assessment. In addition, we present and discuss the toxicity of PW considering the paucity of such information in peer-reviewed literature. Integr Environ Assess Manag 2024;20:498-517. © 2023 Commonwealth Scientific and Industrial Research Organisation. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).
产自澳大利亚近海石油和天然气活动的生产水(PW)通常在经过处理后排放到海洋中。这些有机和无机化合物的复杂混合物如果管理不当,可能会对受纳水造成重大的环境风险。澳大利亚的石油和天然气运营商被要求证明其活动的环境影响已按照尽可能低的实际可行水平进行管理,例如,通过风险评估将预测无影响浓度 (PNEC) 与 PW 的预测环境浓度进行比较。概率物种敏感性分布 (SSD) 方法越来越多地用于推导出 PW 的 PNEC,然后计算 PW 的稀释倍数(称为“安全”稀释倍数),以保护受纳环境中指定百分比的物种(例如,95% 和 99% 或 PC95 和 PC99)。SSD 方法存在的局限性包括将单个模型拟合到小的(六到八个物种)数据集,导致与 PC99 和 PC95 结果相关的区域存在很大的不确定性(非常宽的 95%置信区间)。SSD 方法的最新进展,以模型平均的形式,声称通过将多个模型的平均模型拟合应用于数据集,可以克服这些局限性。我们评估了四种不同的 SSD 软件包在确定来自澳大利亚西北大陆架天然气和凝析油平台的五种 PW 的 PNEC 方面的优缺点。与单一模型拟合相比,模型平均减少了 PC95 和 PC99 值周围出现极端不确定性的情况,并且不太容易导致由于对单一模型拟合不足而得出过于保守的 PC99 和 PC95 值。我们的结果支持使用模型平均来提高推导出的 PNEC 的稳健性,以及随后用于 PW 排放管理和风险评估的“安全”稀释值。此外,我们根据同行评议文献中此类信息的缺乏,介绍和讨论了 PW 的毒性。2024 年,环境评估与管理 20:498-517。©2023 联邦科学与工业研究组织。环境毒理化学学会 (SETAC) 旗下 Wiley Periodicals LLC 出版的综合环境评估与管理。