Liu Yu, Ma Cai Y, Gong Junbo, Roberts Kevin J
State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin, 300072, China.
Centre for the Digital Design of Drug Products, School of Chemical and Process Engineering, University of Leeds, Woodhouse Lane, Leeds LS2 9JT, U.K.
Cryst Growth Des. 2023 Jul 17;23(8):5846-5859. doi: 10.1021/acs.cgd.3c00450. eCollection 2023 Aug 2.
The influence of the solution environment on the solution thermodynamics, crystallizability, and nucleation of tolfenamic acid (TFA) in five different solvents (isopropanol, ethanol, methanol, toluene, and acetonitrile) is examined using an integrated workflow encompassing both experimental studies and intermolecular modeling. The solubility of TFA in isopropanol is found to be the highest, consistent with the strongest solvent-solute interactions, and a concomitantly higher than ideal solubility. The crystallizability is found to be highly dependent on the solvent type with the overall order being isopropanol < ethanol < methanol < toluene < acetonitrile with the widest solution metastable zone width in isopropanol (24.49 to 47.41 °C) and the narrowest in acetonitrile (8.23 to 16.17 °C). Nucleation is found to occur via progressive mechanism in all the solvents studied. The calculated nucleation parameters reveal a considerably higher interfacial tension and larger critical nucleus radius in the isopropanol solutions, indicating the higher energy barrier hindering nucleation and hence lowering the nucleation rate. This is supported by diffusion coefficient measurements which are lowest in isopropanol, highlighting the lower molecular diffusion in the bulk of solution compared to the other solutions. The TFA concentration and critical supersaturation at the crystallization onset is found to be directly correlated with TFA/isopropanol solutions having the highest values of solubility and critical supersaturation. Intermolecular modeling of solute-solvent interactions supports the experimental observations of the solubility and crystallizability, highlighting the importance of understanding solvent selection and solution state structure at the molecular level in directing the solubility, solute mass transfer, crystallizability, and nucleation kinetics.
采用包括实验研究和分子间建模的综合工作流程,研究了五种不同溶剂(异丙醇、乙醇、甲醇、甲苯和乙腈)中溶液环境对托芬那酸(TFA)的溶液热力学、结晶性和成核的影响。发现TFA在异丙醇中的溶解度最高,这与最强的溶剂 - 溶质相互作用一致,且伴随着高于理想溶解度。发现结晶性高度依赖于溶剂类型,总体顺序为异丙醇<乙醇<甲醇<甲苯<乙腈,异丙醇中溶液亚稳区宽度最宽(24.49至47.41℃),乙腈中最窄(8.23至16.17℃)。发现在所有研究的溶剂中,成核均通过渐进机制发生。计算得到的成核参数显示,异丙醇溶液中的界面张力明显更高,临界核半径更大,这表明阻碍成核的能垒更高,从而降低了成核速率。扩散系数测量结果支持了这一点,异丙醇中的扩散系数最低,突出了与其他溶液相比,本体溶液中分子扩散较低。发现结晶开始时的TFA浓度和临界过饱和度与具有最高溶解度和临界过饱和度值的TFA/异丙醇溶液直接相关。溶质 - 溶剂相互作用的分子间建模支持了溶解度和结晶性的实验观察结果,突出了在分子水平上理解溶剂选择和溶液状态结构对指导溶解度、溶质传质、结晶性和成核动力学的重要性。