Suppr超能文献

使用术前胸部X线确定经腋静脉置管进行中心静脉置管的最佳插入长度——一项前瞻性可行性研究

Determination of the optimal length of insertion for central venous catheterization via axillary vein cannulation using preoperative chest X-ray- A prospective feasibility study.

作者信息

Naik Srikanth, Pappu Ameya, Sarathkumar M S, Ramachandran Rashmi, Arora M K, Trikha Anjan, Singh Preet M, Anand Rahul Kumar, Das Chandan J, Rewari Vimi

机构信息

Department of Anaesthesiology, Pain Medicine and Critical Care, New Delhi, India.

Department of Anaesthesia, Institute of Liver and Biliary Sciences, New Delhi, India.

出版信息

J Anaesthesiol Clin Pharmacol. 2023 Apr-Jun;39(2):215-219. doi: 10.4103/joacp.joacp_223_21. Epub 2023 May 31.

Abstract

BACKGROUND AND AIMS

Ensuring safe central venous catheter tip placement is important. Multiple techniques are available to estimate the length of catheter insertion for subclavian and internal jugular approaches. However, the methods to determine the length of insertion for the axillary route have not been validated. The purpose of this feasibility study was to evaluate a simple method for the calculation of catheter length to be inserted and assess whether it accurately predicts the correct tip placement.

MATERIAL AND METHODS

A total of 102 patients requiring preoperative central venous cannulation were evaluated, out of which 60 had successful axillary vein (AxV) cannulation. The length of insertion was calculated using the formula: (2/3* A + B) +Y (A: Clavicular length on chest radiograph [CXR], B: Vertical distance between the sternal head and carina on CXR, Y: Perpendicular distance from the skin to the AxV on ultrasound). A postoperative CXR was used to assess the accurate tip placement (2 cm above the carina to 0.5 cm below it). The primary outcome of the study was the rate of successful placement of the central venous catheter (CVC) in terms of the correct position of the tip of the catheter when the length of the catheter inserted was predicted by the formula described previously.

RESULTS

Optimal placement was observed in 83.33% of the cases. A higher rate of accuracy was seen in the females ( value = 0.03) and shorter patients ( value = 0.01). A Bland-Altman plot depicted a high degree of agreement.

CONCLUSION

Use of the formula using a CXR and ultrasound allowed successful placement of the CVC tip at the desired location in 83.33% of the cases.

摘要

背景与目的

确保中心静脉导管尖端安全置入至关重要。有多种技术可用于估计锁骨下和颈内静脉入路的导管插入长度。然而,确定腋路插入长度的方法尚未得到验证。本可行性研究的目的是评估一种计算导管插入长度的简单方法,并评估其是否能准确预测正确的尖端位置。

材料与方法

共评估了102例术前需要中心静脉置管的患者,其中60例成功进行了腋静脉(AxV)置管。使用公式计算插入长度:(2/3 * A + B)+Y(A:胸部X线片[CXR]上的锁骨长度,B:CXR上胸骨柄与隆突之间的垂直距离,Y:超声下皮肤至AxV的垂直距离)。术后CXR用于评估尖端的准确位置(隆突上方2 cm至下方0.5 cm)。本研究的主要结果是,当按照上述公式预测导管插入长度时,中心静脉导管(CVC)尖端正确位置的成功置入率。

结果

83.33%的病例观察到最佳位置。女性(值 = 0.03)和身材较矮的患者(值 = 0.01)的准确率更高。Bland-Altman图显示高度一致性。

结论

使用基于CXR和超声的公式,83.33%的病例中CVC尖端成功置于所需位置。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/c22c/10410044/5e58ab6afb70/JOACP-39-215-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验