Preparation of a Solvent-Resistant Nanofiltration Membrane of Liquefied Walnut Shell Modified by Ethylenediamine.

N,N-dimethylformamide (DMF) has excellent chemical stability and is widely used as an aprotic polar solvent. In order to reduce production costs and reduce pollution to the surrounding environment, it is necessary to recycle and reuse DMF. Previous research has found that the thin film composite nanofiltration membrane prepared from liquefied walnut shells exhibited a high rejection rate in DMF, but relatively low permeance and mechanical strength. In order to increase permeance without compromising the separation performance, ethylenediamine (EDA) is used as a modifier to graft onto the structure of liquefied walnut shell through the Mannich reaction. Then, modified liquefied walnut shell as an aqueous monomer reacts with trimesoyl chloride (TMC) via the interfacial polymerization method on the EDA-crosslinked polyetherimide (PEI) membrane. The results show that the permeance of the prepared membrane is significantly improved by an order of magnitude, demonstrating a rejection rate of 98% for crystal violet (CV), and a permeance of 3.53 L m h bar in DMF. In conclusion, this study reveals the potential of utilizing liquefied walnut shells as raw materials for preparing high-performance separation membranes and demonstrates that surface modification is a feasible approach to enhance permeance of membranes without sacrificing the rejection rate.