Faculty of Mechanical and Material Engineering, Jiangsu Provincial Engineering Research Center for Biomaterials and Advanced Medical Devices, Huaiyin Institute of Technology, Huai'an 223003, China.
The Affiliated Huai'an Hospital, Xuzhou Medical University, Huai'an 223003, China.
Int J Biol Macromol. 2023 Dec 31;253(Pt 1):126727. doi: 10.1016/j.ijbiomac.2023.126727. Epub 2023 Sep 9.
Thanks to their outstanding mechanical properties and corrosion resistance in physiological environments, titanium and its alloys are broadly explored in the field of intravascular devices. However, the biocompatibility is insufficient, causing thrombus formation and even implantation failure. In this study, inspired by the functions of endothelial glycocalyx and the NO-releasing of endothelial cells (ECs), a biomimetic coating (TNTA-Se) with three-dimensional gel-like structures and NO-catalytically generating ability was constructed on the titanium surface. To this end, the titanium alloy was firstly anodized and then annealed to form nanotube structures imitating the three-dimensional villous of glycocalyx, followed by the preparation of the Cu-loaded polydopamine intermediate layer for the immobilization of carboxymethyl chitosan and sodium alginate to form the hydrogel structure. Finally, an organoselenium compound (selenocystamine) as an active catalyst was covalently immobilized on the surface to develop a bioactive coating mimicking endothelial function with NO-generating activity. The surface morphologies and chemical structures of the biomimetic coating were characterized by scanning electron microscopy (SEM), energy dispersion X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and the results indicated that the NO-catalytically generating hydrogel coating was successfully constructed. The results of water contact angle and protein adsorption suggested that the TNTA-Se coating exhibited excellent hydrophilicity, the promotion of bovine serum albumin (BSA) adsorption while the inhibition of fibrinogen (FIB) adsorption. Upon the addition of NO donor S-nitroso glutathione (GSNO) and reducing agent glutathione (GSH), the surface (TNTA-NO) displayed excellent blood compatibility and cytocompatibility to ECs. Compared with other surfaces, the TNTA-NO coating can not only further promote BSA adsorption and inhibit the adhesion and activation of platelets as well as hemolysis, but also significantly enhance ECs adhesion and proliferation and up-regulate VEGF and NO expression of ECs. The current study demonstrated that the NO-catalytically generating hydrogel coating on the titanium alloy can mimic the glycocalyx structure and endothelium function to catalyze a large number of NO donors in human blood to produce NO, and thus simultaneously enhance the surface hemocompatibility and endothelialization, representing a promising strategy for long-term cardiovascular implants of titanium-based devices.
由于其在生理环境中出色的机械性能和耐腐蚀性,钛及其合金在血管内设备领域得到了广泛的探索。然而,其生物相容性不足,导致血栓形成甚至植入物失败。在这项研究中,受内皮糖萼功能和内皮细胞 (ECs) 释放一氧化氮 (NO) 的启发,在钛表面构建了具有三维凝胶状结构和 NO 催化生成能力的仿生涂层 (TNTA-Se)。为此,首先对钛合金进行阳极氧化和退火处理,形成模仿糖萼三维绒毛的纳米管结构,然后制备负载铜的聚多巴胺中间层,用于固定羧甲基壳聚糖和海藻酸钠以形成水凝胶结构。最后,将有机硒化合物 (半胱胺硒) 作为活性催化剂共价固定在表面上,开发出具有生成活性的 NO 的仿生内皮功能的活性涂层。通过扫描电子显微镜 (SEM)、能谱仪 (EDS)、X 射线光电子能谱 (XPS) 和衰减全反射傅里叶变换红外光谱 (ATR-FTIR) 对仿生涂层的表面形貌和化学结构进行了表征,结果表明成功构建了具有催化生成 NO 的水凝胶涂层。水接触角和蛋白质吸附结果表明,TNTA-Se 涂层具有优异的亲水性,促进牛血清白蛋白 (BSA) 吸附,同时抑制纤维蛋白原 (FIB) 吸附。加入一氧化氮供体 S-亚硝基谷胱甘肽 (GSNO) 和还原剂谷胱甘肽 (GSH) 后,表面 (TNTA-NO) 表现出优异的血液相容性和对 ECs 的细胞相容性。与其他表面相比,TNTA-NO 涂层不仅可以进一步促进 BSA 吸附,抑制血小板黏附和激活以及溶血,还可以显著增强 ECs 的黏附和增殖,并上调 ECs 的 VEGF 和 NO 表达。本研究表明,钛合金上催化生成 NO 的水凝胶涂层可以模拟糖萼结构和内皮功能,在人体血液中催化大量一氧化氮供体产生 NO,从而同时提高表面血液相容性和内皮化,为基于钛的心血管植入物的长期应用提供了一种很有前途的策略。