Jo Seonyoung, Lee Hyeonhee, Park Ji Hwan, Yang Jin-Kyoung, Lee Won-Jong, Lim Jongchul, Kim Sehoon, Lee Soojin, Lee Taek Seung
Department of Organic Materials Engineering, Chungnam National University, Daejeon 34134, Korea.
Department of Microbiology & Molecular Biology, Chungnam National University, Daejeon 34134, Korea.
ACS Appl Mater Interfaces. 2023 Sep 20;15(37):43455-43467. doi: 10.1021/acsami.3c08404. Epub 2023 Sep 8.
To advance cancer treatment, we have developed a novel composite material consisting of conjugated polymer dots (CPDs) and Prussian blue (PB) particles, which were immobilized on, and encapsulated within, silica particles, respectively. The CPDs functioned as both a photosensitizer and a photodynamic agent, and the PB acted as a photothermal agent. The silica platform provided a biocompatible matrix that brought the two components into close proximity. Under laser irradiation, the fluorescence from the CPDs in the composite material enabled cell imaging and was subsequently converted to thermal energy by PB. This efficient energy transfer was accomplished because of the spectral overlap between the emission of donor CPDs and the absorbance of acceptor PB. The increase in local temperature in the cells resulted in a significant increase in the amount of reactive oxygen species (ROS) generated by CPDs, in which their independent use did not produce sufficient ROS for cancer cell treatment. To assess the impact of the enhanced ROS generation by the composite material, we conducted experiments using cancer cells under 532 nm laser irradiation. The results showed that with the increase in local temperature, the generated ROS increased by 30% compared with the control, which did not contain PB. When the silica-based composite material was positioned at the periphery of the tumor for 120 h, it led to a much slower tumor growth than other materials tested. By using a CPD-based photodynamic therapy platform, a new simplified approach to designing and preparing cancer treatments could be achieved, which included photothermal PB-assisted enhanced ROS generation using a single laser. This advancement opens up an exciting new opportunity for effective cancer treatment.
为了推进癌症治疗,我们开发了一种新型复合材料,它由共轭聚合物点(CPDs)和普鲁士蓝(PB)颗粒组成,分别固定在二氧化硅颗粒上并封装在其中。CPDs既作为光敏剂又作为光动力剂,而PB作为光热剂。二氧化硅平台提供了一个生物相容性基质,使这两种成分紧密靠近。在激光照射下,复合材料中CPDs发出的荧光可用于细胞成像,随后被PB转化为热能。由于供体CPDs的发射光谱与受体PB的吸收光谱存在光谱重叠,从而实现了这种高效的能量转移。细胞内局部温度的升高导致CPDs产生的活性氧(ROS)量显著增加,而单独使用CPDs时产生的ROS不足以用于癌细胞治疗。为了评估复合材料增强ROS生成的影响,我们在532nm激光照射下对癌细胞进行了实验。结果表明,随着局部温度的升高,与不含PB的对照组相比,产生的ROS增加了30%。当基于二氧化硅的复合材料置于肿瘤周边120小时时,其导致的肿瘤生长比其他测试材料慢得多。通过使用基于CPD的光动力治疗平台,可以实现一种设计和制备癌症治疗方法的新的简化方法,其中包括使用单一激光进行光热PB辅助增强ROS生成。这一进展为有效的癌症治疗开辟了一个令人兴奋的新机会。