CEESAR (Nanterre - France).
Faurecia Automotive Seating (France).
Stapp Car Crash J. 2022 Nov;66:1-30. doi: 10.4271/2022-22-0001.
The reality of the autonomous vehicle in a near future is growing and is expected to induce significant change inthe occupant posture with respect to a standard driving posture. The delegated driving would allow sleeping and/or resting in a seatwith a reclined posture. However, the data in the literature are rare on the body kinematics, human tolerance, and injury types insuch reclined postures. The current study aims at increasing the knowledge in the domain and providing useful data to assess therelevance of the standard injury assessment tools such as anthropomorphic test devices or finite element human body models. For that purpose, a test series of three male Post-Mortem Human Subjects (PMHS) were performed in frontal impact at a 13.4 m/sdelta V. The backseat inclination was 58 degrees with respect to the vertical axis. The semi-rigid seat developed by Uriot et al.(2015) was used with a stiffer seat ramp. The restraint was composed of a lap belt equipped with two 3.5 kN load limiters, and ofa shoulder belt equipped of a 4 kN load limiter on the upper anchorage placed in the vicinity of the shoulder. The belts, the semi-rigid seat, and the footrest were equipped with force sensors. The rotations of the seat pan and of the seat ramp were also measured. The PMHS were instrumented with multi-axis accelerometers and Y angular velocity sensors attached to the head, thorax (T1 andT12 vertebrae), and sacrum. Strain gauges were glued onto the anterior face of the L1 to L5 lumbar vertebrae and onto the anteriorface of the iliac wings. To estimate the pelvis kinematics, a rigid support equipped with targets was fixed onto the femur shaft. Prior to test, X-ray imagery was performed to exhibit the initial curvature of the lumbar spine. After the tests, an in-depth necropsywas done, with a specific attention to the lumbar spine. In the chosen test conditions, no lap-belt submarining was observed for the three PMHS. One PMHS sustained an AIS2 pelvic ringfracture and another one sustained an AIS4 injury with complete separation of the left and right sacroiliac joints. Lumbar discruptures and vertebral fractures were observed for the three PMHS (AIS 2 and AIS3 coding). The number of separated rib fractureswere very different from one PMHS to another (0, 6 and 33). Response corridors for the external forces and kinematics were builtand are presented in the paper. The results are discussed by comparing with existing data for which the backseat was in standardposture.
自动驾驶车辆在不久的将来将成为现实,预计这将导致乘员相对于标准驾驶姿势的姿态发生重大变化。自动驾驶将允许人们在倾斜座椅上躺着或休息。然而,关于这种倾斜姿势下的人体运动学、人体耐受性和损伤类型的数据在文献中很少见。本研究旨在增加该领域的知识,并提供有用的数据来评估标准损伤评估工具(如拟人测试设备或有限元人体模型)的相关性。为此,对三个男性尸体进行了正面冲击试验,试验速度为 13.4 m/s,delta V。后排座椅倾斜度为 58 度,相对于垂直轴。Uriot 等人开发的半刚性座椅(2015 年)用于更硬的座椅斜坡。约束装置由配备两个 3.5 kN 限载器的腰带和配备 4 kN 限载器的肩带组成,限载器在上锚点附近位于肩部。安全带、半刚性座椅和脚踏板均配备力传感器。座椅托盘和座椅斜坡的旋转也进行了测量。PMHS 配备了多轴加速度计和附着在头部、胸部(T1 和 T12 椎骨)和骶骨的 Y 角速度传感器。应变片粘贴在 L1 到 L5 腰椎的前表面和髂骨翼的前表面。为了估计骨盆运动学,将配备目标的刚性支撑固定在股骨轴上。在测试之前,进行了 X 射线成像以显示腰椎的初始曲率。测试后,进行了深入的尸体解剖,特别注意腰椎。在所选择的测试条件下,三个 PMHS 均未观察到安全带下潜。一个 PMHS 发生 AIS2 骨盆环骨折,另一个 PMHS 发生 AIS4 损伤,左右骶髂关节完全分离。三个 PMHS 都观察到腰椎间盘破裂和椎体骨折(AIS 2 和 AIS3 编码)。肋骨骨折分离的数量在 PMHS 之间差异很大(0、6 和 33)。本文构建了外部力和运动学的响应通道,并进行了介绍。通过与后排座椅处于标准姿势的现有数据进行比较,对结果进行了讨论。