Department of Oncology, Daping Hospital, Army Medical University, 10 Changjiang Branch Road, Chongqing, 400042, China.
Department of Critical Care MedicineDaping Hospital, Army Medical University, Chongqing, 400042, China.
Eur J Med Res. 2023 Sep 22;28(1):367. doi: 10.1186/s40001-023-01333-x.
This study investigates the accuracy of 3D-printed dental stents in intensity-modulated radiotherapy (IMRT) for oropharyngeal cancer (OPC) and their dosimetric effects on normal tissues.
We selected 60 patients with OPC who underwent IMRT in the Department of Oncology, Special Medical Center of Army Medical University. These patients were randomly assigned into 3D-printed oral stent, simple glass bottle, and nonstent groups (20 patients/group). The positioning error was analyzed with the onboard imaging system once a week after 5 fractions of IMRT. The conformity index (CI), homogeneity index (HI), radiation dose of organs at risk (OARs), and oral mucosal reaction were compared among the three groups.
No significant difference was observed in the conformity and uniformity of the target dose and the dose received by the spinal cord, larynx, and bilateral parotid glands among the three groups (P > 0.05). Meanwhile, the dose received by the upper cheek, hard palate, and soft palate of patients was significantly lower in the 3D-printed oral stent group than in the nonstent group (P < 0.05) but insignificantly different between the 3D-printed oral stent and simple glass bottle groups (P > 0.05). When compared with the nonstent group, the simple glass bottle group showed a markedly lower dose received by the upper cheek (P < 0.05) and an insignificantly different dose received by the hard palate and soft palate (P > 0.05). According to Common Terminology Criteria for Adverse Events v.5.0, the adverse response rate of the hard palate mucosa was lower in the 3D-printed oral stent group than in the simple glass bottle and nonstent groups (P < 0.05).
For OPC patients undergoing IMRT, the application of 3D-printed oral stents can significantly reduce the exposure dose of the upper cheek and hard palate and decrease the occurrence of adverse events such as oral mucositis although it cannot affect the positioning error.
本研究旨在探讨 3D 打印牙科支架在口咽癌调强放疗(IMRT)中的准确性及其对正常组织的剂量学影响。
我们选择了 60 例在陆军军医大学附属肿瘤医院接受 IMRT 的口咽癌患者,将其随机分为 3D 打印口腔支架组、简易玻璃瓶组和无支架组(每组 20 例)。在 IMRT 进行 5 个分次后,每周使用在线成像系统分析定位误差。比较三组患者的适形指数(CI)、均匀性指数(HI)、危及器官(OAR)的照射剂量和口腔黏膜反应。
三组患者的靶区剂量和脊髓、喉及双侧腮腺的受照剂量的一致性和均匀性无显著差异(P>0.05)。同时,3D 打印口腔支架组患者的上颊部、硬腭和软腭的受照剂量明显低于无支架组(P<0.05),与简易玻璃瓶组无显著差异(P>0.05)。与无支架组相比,简易玻璃瓶组上颊部的受照剂量明显降低(P<0.05),硬腭和软腭的受照剂量无显著差异(P>0.05)。根据不良事件通用术语标准 5.0 版,3D 打印口腔支架组患者硬腭黏膜的不良反应发生率低于简易玻璃瓶组和无支架组(P<0.05)。
对于接受 IMRT 的口咽癌患者,3D 打印口腔支架的应用可显著降低上颊部和硬腭的受照剂量,减少口腔黏膜炎等不良反应的发生,尽管它不能影响定位误差。