Suppr超能文献

用于无标记检测病原菌铜绿假单胞菌的导模共振免疫传感器。

Guided mode resonance immunosensor for label-free detection of pathogenic bacteria Pseudomonas aeruginosa.

作者信息

Joseph Shereena, Rajpal Soumya, Kar Debashree, Devinder Shital, Pandey Saurabh, Mishra Prashant, Joseph Joby

机构信息

Department of Physics, Indian Institute of Technology Delhi, New Delhi, India.

Department of Biochemical Engineering and Biotechnology, Indian Institute of Technology Delhi, New Delhi, India.

出版信息

Biosens Bioelectron. 2023 Dec 1;241:115695. doi: 10.1016/j.bios.2023.115695. Epub 2023 Sep 23.

Abstract

Photonic biosensors are promising platforms for the rapid detection of pathogens with the potential to replace conventional diagnostics based on microbiological culturing methods. Intricately designed sensing elements with robust architectures can offer highly sensitive detection at minimal development cost enabling rapid adoption in low-resource settings. In this work, an optical detection scheme is developed by structuring guided mode resonance (GMR) on a highly stable, transparent silicon nitride (SiN) substrate and further biofunctionalized to identify a specific bacteria Pseudomonas aeruginosa. The resonance condition of the GMR chip is optimized to have relatively high bulk sensitivity with a good quality factor. The biofunctionalization aims at oriented immobilization of specific antibodies to allow maximum bacteria attachment and improved specificity. The sensitivity of the assays is evaluated for clinically relevant concentrations ranging from 10 to 10 CFU/mL. From the calibration curves, the sensitivity of the chip is extracted as 0.134nm/Log [concentration], and the detection modality possesses a favorably good limit of detection (LOD) 89 CFU/mL. The use of antibodies as a biorecognition element complemented with a good figure of merit of GMR sensing element allows selective bacteria identification compared to other non-specific pathogenic bacteria that are relevant for testing physiological samples. Our developed GMR biosensor is low-cost, easy to handle, and readily transformable into a portable handheld detection modality for remote usage.

摘要

光子生物传感器是用于快速检测病原体的有前景的平台,有潜力取代基于微生物培养方法的传统诊断方法。设计精巧且结构坚固的传感元件能够以最低的开发成本提供高灵敏度检测,从而能够在资源匮乏的环境中快速应用。在这项工作中,通过在高度稳定的透明氮化硅(SiN)衬底上构建导模共振(GMR)来开发一种光学检测方案,并进一步进行生物功能化以识别特定细菌铜绿假单胞菌。对GMR芯片的共振条件进行了优化,使其具有相对较高的体灵敏度和良好的品质因数。生物功能化旨在定向固定特定抗体,以实现最大程度的细菌附着并提高特异性。针对临床相关浓度范围为10至10 CFU/mL的情况评估了检测的灵敏度。从校准曲线中,提取出芯片的灵敏度为0.134nm/Log[浓度],并且该检测方式具有良好的检测限(LOD)89 CFU/mL。与用于检测生理样本的其他非特异性致病细菌相比,使用抗体作为生物识别元件并辅以GMR传感元件的良好品质因数能够实现选择性细菌识别。我们开发的GMR生物传感器成本低、易于操作,并且易于转化为便于远程使用的便携式手持检测方式。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验