Barbosa Mariana Caldeira, Silva Gabriela Leite, Viana Eduardo Bruno Macedo, Bonomo Renata Cristina Ferreira, Rodrigues Luciano Brito, Veloso Cristiane Martins
Process Engineering Laboratory, State University of Southwestern Bahia, Itapetinga, BA 45700-000 Brazil.
State University of Southwestern Bahia, Vitória da Conquista, BA 45083-900 Brazil.
J Food Sci Technol. 2023 Dec;60(12):2916-2926. doi: 10.1007/s13197-023-05793-1. Epub 2023 Jul 13.
Starches and proteins are two major types of biopolymer components in many foods. The interactions of protein with starches greatly influence the matrix structure and properties of starch-based food systems. In this study, the physical-chemical properties and the effect of the commercial whey protein concentrate in the texture and rheological properties of jackfruit starch gels were evaluated. The experimental design was completely randomized, using a 4 × 4 complete factorial scheme, with four levels of starch (3, 6, 9 and 12%) and four levels of protein (0, 2, 4 and 6%). In higher concentrations of starch the addition of proteins delayed the beginning of gelatinization, led to an increase in G' and G″ and decrease in the tan (δ) values, characterizing the gel as strong, e.g., the gel network became more structured. However, in the treatment with 6% starch the addition of protein led to a decrease in gel strength. For gels with 9% starch the increase in protein concentration, led a slight increase in the hardness and cohesiveness, characterizing a more rigid and cohesive gel. Overall, gels with 3 and 6% of starch showed characteristic behavior of a weak gel and with 9 and 12% of strong gel.
The online version contains supplementary material available at 10.1007/s13197-023-05793-1.
淀粉和蛋白质是许多食物中两种主要的生物聚合物成分。蛋白质与淀粉的相互作用极大地影响了淀粉基食品体系的基质结构和性质。在本研究中,评估了商业乳清蛋白浓缩物对菠萝蜜淀粉凝胶的物理化学性质以及质地和流变学性质的影响。实验设计完全随机,采用4×4完全析因方案,有四个淀粉水平(3%、6%、9%和12%)和四个蛋白质水平(0、2%、4%和6%)。在较高淀粉浓度下,添加蛋白质会延迟糊化开始,导致储能模量(G')和损耗模量(G″)增加,损耗角正切(tan(δ))值降低,表明凝胶强度较高,即凝胶网络结构更紧密。然而,在6%淀粉处理中,添加蛋白质会导致凝胶强度降低。对于9%淀粉的凝胶,蛋白质浓度增加会导致硬度和内聚性略有增加,表明凝胶更坚硬且内聚性更强。总体而言,含3%和6%淀粉的凝胶表现出弱凝胶的特征行为,含9%和12%淀粉的凝胶表现出强凝胶的特征行为。
在线版本包含可在10.1007/s13197-023-05793-1获取的补充材料。