Effect of Wet-Dry Cycling on Properties of Natural-Cellulose-Fiber-Reinforced Geopolymers: A Short Review.

To study the long-term properties of cement-based and geopolymer materials exposed to outdoor environments, wet-dry cycles are usually used to accelerate their aging. The wet-dry cycling can simulate the effects of environmental factors on the long-term properties of the composites under natural conditions. Nowadays, the long-term properties of geopolymer materials are studied increasingly deeply. Unlike cement-based materials, geopolymers have better long-term properties due to their high early strength, fast hardening rate, and wide range of raw material sources. At the same time, natural cellulose fibers (NCFs) have the characteristics of abundant raw materials, low price, low carbon, and environmental protection. The use of NCFs as reinforcements of geopolymer matrix materials meets the requirements of sustainable development. In this paper, the types and properties of NCFs commonly used for geopolymer reinforcement and the polymerization mechanism of geopolymer matrix materials are summarized. By analyzing the properties of natural-cellulose-fiber-reinforced geopolymers (NCFRGs) under non-wet-dry cycles and NCFRGs under wet-dry cycles, the factors affecting the long-term properties of NCFRGs under wet-dry cycles are identified. Meanwhile, the degradation mechanism and mechanical properties of NCFRG composites after wet-dry cycles are analyzed. In addition, the relationship between the properties of composites and the change of microstructure of fiber degradation is further analyzed according to the results of microscopic analysis. Finally, the effects of wet-dry cycles on the properties of fibers and geopolymers are obtained.