Development of a low-cost photocatalytic aerogel based on cellulose, carbon nanotubes, and TiO nanoparticles for the degradation of organic dyes.

A hybrid ultra-light and porous cellulose aerogel was prepared by extracting cellulose fibers from white paper, alkali/urea as a crosslinker agent, and functionalized with CNTs and pure anatase TiO nanoparticles. Since CNTs work as mechanical reinforcement for aerogels, physical and mechanical properties were measured. Besides, since TiO acts as a photocatalyst for degrading dyes (rhodamine B and methylene blue), UV-Vis spectroscopy under UV light, visible light, and darkroom was used to evaluate the degradation process. XRD, FTIR, and TGA were employed to characterize the structural and thermal properties of the composite. The nanostructured solid network of aerogels was visualized in SEM microscopy confirming the structural uniformity of cellulose and TiO-CNTs onto fibers. Moreover, CLSM was used to study the nano-porous network distribution of cellulose fibers and porosity, and the functionalization process in a detailed way. Finally, the photocatalytic activity of aerogels was evaluated by degradation of dye aqueous solutions, with the best photocatalytic removal (>97 %) occurring after 110 min of UV irradiation. In addition, HPLC-MS facilitated the proposed mechanism for the degradation of dyes. These results confirm that cellulose aerogels coupled with nanomaterials enable the creation of economic support to reduce water pollution with higher decontamination rates.