Wei Yuchen, Ji Qinggong, Wang Kai, Zhang Jian, Niu Jinfen, Yu Xiaojiao
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China.
School of Science, Xi'an University of Technology, Xi'an 710048, China.
Molecules. 2023 Nov 13;28(22):7560. doi: 10.3390/molecules28227560.
A Pr-doped p-CuO thin film was prepared on indium tin oxide conductive glass by electrochemical deposition; the effect of Pr doping on the structure, morphology, and physicochemical properties of p-CuO was investigated. The results show that with the increase in Pr doping amount, the particle size of p-CuO increases, the absorption boundary redshifts, and the band-gap width decreases. Pr doping increases the flat band potential and carrier concentration of p-CuO; when the doping amount is 1.2 mM, the carrier concentration reaches 1.14 × 1024 cm. Compared with pure p-CuO, the charge transfer resistance of Pr-doped p-CuO decreases and the photocurrent and open circuit voltage increase, indicating that the carrier transfer rate is accelerated, and the separation efficiency of photogenerated electrons and holes is effectively improved. The result of a norfloxacin photocatalytic degradation experiment showed that the degradation rate of norfloxacin increased from 52.3% to 76.2% and Pr doping effectively improved the photocatalytic performance of p-CuO. The main reasons for enhancing the photocatalytic performance are that the band gap of Pr-doped p-CuO decreases, the Fermi level of CuO is closer to the valence band position, the hole concentration near the valence band, and the oxidation capacity increases, and more h oxidize norfloxacin molecules. In addition, the Pr in Pr-CuO acts as a conductor to guide electrons on the guide band to the crystal surface, which increases the contact between photogenerated electrons and dissolved oxygen, which is conducive to the formation of the active species ·O and can effectively reduce the recombination of photogenerated carriers. In the process of photocatalytic degradation of norfloxacin, the main active species are ·O, ·OH, and h, which play auxiliary roles. TOC tests show that the norfloxacin molecules can be effectively degraded into small molecule organic matter, CO, and HO in the presence of Pr-doped p-CuO.
通过电化学沉积法在氧化铟锡导电玻璃上制备了掺镨的p型氧化铜(p-CuO)薄膜;研究了镨掺杂对p-CuO结构、形貌和物理化学性质的影响。结果表明,随着镨掺杂量的增加,p-CuO的粒径增大,吸收边界红移,带隙宽度减小。镨掺杂提高了p-CuO的平带电位和载流子浓度;当掺杂量为1.2 mM时,载流子浓度达到1.14×10²⁴ cm⁻³。与纯p-CuO相比,掺镨p-CuO的电荷转移电阻降低,光电流和开路电压增加,表明载流子转移速率加快,光生电子和空穴的分离效率有效提高。诺氟沙星光催化降解实验结果表明,诺氟沙星的降解率从52.3%提高到76.2%,镨掺杂有效提高了p-CuO的光催化性能。光催化性能增强的主要原因是掺镨p-CuO的带隙减小,氧化铜的费米能级更接近价带位置,价带附近的空穴浓度增加,氧化能力增强,更多的空穴氧化诺氟沙星分子。此外,Pr-CuO中的镨作为导体,将导带上的电子引导到晶体表面,增加了光生电子与溶解氧的接触,有利于活性物种·O₂⁻的形成,能有效减少光生载流子的复合。在诺氟沙星光催化降解过程中,主要活性物种为·O₂⁻、·OH和h⁺,它们起辅助作用。总有机碳测试表明,在掺镨p-CuO存在下,诺氟沙星分子可有效降解为小分子有机物、CO₂和H₂O。