Shi Fan, Zhang Hao, Jiang Chengxiang, Fu Kang, Wang Linning, Qi Ziqian, Sun Zhihang, Fang Li, Zhu Hongbo, Yan Jiabin, Wang Yongjin
Opt Lett. 2024 Jan 1;49(1):169-172. doi: 10.1364/OL.510934.
This Letter reports a collinear optical interconnect architecture for acoustic sensing via a monolithic integrated GaN optoelectronic chip. The chip is designed with a ring-shaped photodiode (PD) surrounding a light-emitting diode (LED) of a spectral range from 420-530 nm. The axisymmetric structure helps the coaxial propagation of light transmission and reception. By placing this multiple-quantum wells (MQW)-based device and a piece of aluminum-coated polyethylene terephthalate (Al/PET) film on fiber ends, an ultra-compact acoustic sensing system is built. The sound vibrations can be simply detected by direct measurement of the diaphragm deformation-induced power change. An average signal noise ratio (SNR) of 40 dB and a maximum sensitivity of 82 mV/Pa are obtained when the acoustic vibration frequency changes from 400 Hz to 3.2 kHz. This work provides a feasible solution to miniaturize the sensing system footprint and reduce the cost.
本文报道了一种通过单片集成GaN光电芯片实现声学传感的共线光学互连架构。该芯片设计有一个环形光电二极管(PD),围绕着一个光谱范围为420 - 530 nm的发光二极管(LED)。轴对称结构有助于光的传输和接收的同轴传播。通过将这种基于多量子阱(MQW)的器件和一片镀铝聚对苯二甲酸乙二酯(Al/PET)薄膜放置在光纤末端,构建了一个超紧凑的声学传感系统。通过直接测量膜片变形引起的功率变化,就可以简单地检测到声音振动。当声振动频率从400 Hz变化到3.2 kHz时,获得了平均40 dB的信号噪声比(SNR)和82 mV/Pa的最大灵敏度。这项工作为减小传感系统占地面积和降低成本提供了一种可行的解决方案。