Barber Timothy R, Claes Sophie, Ribeiro Francisca, Dillon Allison E, More Sharlee L, Thornton Stephanie, Unice Kenneth M, Weyrauch Steffen, Reemtsma Thorsten
Environmental Resources Management (ERM), Cleveland, OH, United States.
ERM, Antwerp, Belgium.
Sci Total Environ. 2024 Feb 25;913:169633. doi: 10.1016/j.scitotenv.2023.169633. Epub 2023 Dec 28.
Tire and road wear particles (TRWP) are formed at the frictional interface between tires and the road surface. Tire tread and road pavement materials are denser than water but can be washed from the road surface into receiving water bodies, ultimately depositing into sediment, soil, or other media depending on the receiving environment. However, the paucity of mass-based measurements has limited the knowledge on the nature and extent of environmental concentrations necessary for environmental risk assessment of TRWP. Surface water and sediment samples were collected from the Seine River, France to characterize TRWP concentration. Sample locations were established upstream, within, and downstream of a major metropolitan area (Paris); downstream of smaller urban areas; adjacent to undeveloped land; and near the confluence of the estuary. Surface water and sediment were collected from the left and right banks at each of the eight locations, including two duplicates, for a total of 18 samples. Additionally, three sediment traps were deployed near the mouth of the river to quantify the flux of TRWP to sediment. Retained solids and sediment samples were analyzed using a modified pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) method that minimized the matrix interferences in the samples thus improving the current ISO Technical Specification ISO/TS 21396 : 2017 for TRWP mass concentration by Py-GC/MS. TRWP concentration was alternatively estimated by separating the sediment into the <1.9 g cm fraction and analyzing for tread-derived zinc content. TRWP concentrations estimated by zinc method were significantly higher than results from the modified Py-GC/MS method. TRWP and total zinc concentrations show a decreasing trend from available historical data.
轮胎和道路磨损颗粒(TRWP)形成于轮胎与路面的摩擦界面处。轮胎胎面和路面材料比水的密度大,但可从路面被冲刷到受纳水体中,最终根据受纳环境沉积到沉积物、土壤或其他介质中。然而,基于质量的测量数据匮乏,限制了我们对TRWP环境风险评估所需的环境浓度的性质和程度的了解。从法国塞纳河采集地表水和沉积物样本,以表征TRWP浓度。样本采集地点分别位于一个主要都市圈(巴黎)的上游、圈内和下游;较小城市区域的下游;未开发土地附近;以及河口汇合处附近。在八个地点的左右两岸采集地表水和沉积物,包括两份重复样本,共18个样本。此外,在河口附近部署了三个沉积物捕集器,以量化TRWP向沉积物的通量。使用改进的热解气相色谱/质谱(Py-GC/MS)方法分析截留的固体和沉积物样本,该方法最大限度地减少了样本中的基质干扰,从而改进了目前采用Py-GC/MS测定TRWP质量浓度的ISO技术规范ISO/TS 21396:2017。还通过将沉积物分离成<1.9 g/cm部分并分析胎面衍生的锌含量来估算TRWP浓度。通过锌法估算的TRWP浓度显著高于改进的Py-GC/MS方法的结果。从现有的历史数据来看,TRWP和总锌浓度呈下降趋势。