Yuhas Phillip T, Fortman Maddison M, Mahmoud Ashraf M, Roberts Cynthia J
College of Optometry, The Ohio State University, Columbus, OH, USA.
Department of Ophthalmology and Visual Sciences, College of Medicine, The Ohio State University, Columbus, OH, USA.
Eye Vis (Lond). 2024 Jan 3;11(1):2. doi: 10.1186/s40662-023-00371-0.
Keratoconus is characterized by asymmetry in the biomechanical properties of the cornea, with focal weakness in the area of cone formation. We tested the hypothesis that centrally-measured biomechanical parameters differ between corneas with peripheral cones and corneas with central cones.
Fifty participants with keratoconus were prospectively recruited. The mean ± standard deviation age was 38 ± 13 years. Axial and tangential corneal topography were analyzed in both eyes, if eligible. Cones in the central 3 mm of the cornea were considered central, and cones outside the central 3 mm were considered peripheral. Each eye was then measured with the Ocular Response Analyzer (ORA) tonometer. T-tests compared differences in ORA-generated waveform parameters between cohorts.
Seventy-eight eyes were analyzed. According to the axial topography maps, 37 eyes had central cones and 41 eyes had peripheral cones. According to the tangential topography maps, 53 eyes had central cones, and 25 eyes had peripheral cones. For the axial-topography algorithm, wave score (WS) was significantly higher in peripheral cones than central cones (inter-cohort difference = 1.27 ± 1.87). Peripheral cones had a significantly higher area of first peak, p1area (1047 ± 1346), area of second peak, p2area (1130 ± 1478), height of first peak, h1 (102 ± 147), and height of second peak, h2 (102 ± 127), than central cones. Corneal hysteresis (CH), width of the first peak, w1, and width of the second peak, w2, did not significantly differ between cohorts. There were similar results for the tangential-topography algorithm, with a significant difference between the cohorts for p1area (855 ± 1389), p2area (860 ± 1531), h1 (81.7 ± 151), and h2 (92.1 ± 131).
Cone location affects the biomechanical response parameters measured under central loading of the cornea. The ORA delivers its air puff to the central cornea, so the fact that h1 and h2 and that p1area and p2area were smaller in the central cone cohort than in the peripheral cone cohort suggests that corneas with central cones are softer or more compliant centrally than corneas with peripheral cones, which is consistent with the location of the pathology. This result is evidence that corneal weakening in keratoconus is focal in nature and is consistent with localized disruption of lamellar orientation.
圆锥角膜的特征是角膜生物力学特性不对称,在圆锥形成区域存在局部薄弱。我们检验了这样一个假设,即周边圆锥角膜和中央圆锥角膜的中央测量生物力学参数存在差异。
前瞻性招募了50名圆锥角膜患者。平均年龄±标准差为38±13岁。如果符合条件,对双眼进行轴向和切向角膜地形图分析。角膜中央3毫米范围内的圆锥被视为中央圆锥,中央3毫米范围外的圆锥被视为周边圆锥。然后使用眼反应分析仪(ORA)眼压计对每只眼睛进行测量。采用t检验比较不同队列之间ORA生成的波形参数差异。
分析了78只眼睛。根据轴向地形图,37只眼睛有中央圆锥,41只眼睛有周边圆锥。根据切向地形图,53只眼睛有中央圆锥,25只眼睛有周边圆锥。对于轴向地形图算法,周边圆锥的波分数(WS)显著高于中央圆锥(队列间差异=1.27±1.87)。周边圆锥的第一峰值面积p1area(1047±1346)、第二峰值面积p2area(1130±1478)、第一峰值高度h1(102±147)和第二峰值高度h2(102±127)均显著高于中央圆锥。队列间角膜滞后(CH)、第一峰值宽度w1和第二峰值宽度w2无显著差异。切向地形图算法也有类似结果,队列间p1area(855±1389)、p2area(860±1531)、h1(81.7±151)和h2(92.1±131)存在显著差异。
圆锥位置影响角膜中央加载下测量的生物力学反应参数。ORA将气流吹向角膜中央,因此中央圆锥队列中h1和h2以及p1area和p2area比周边圆锥队列小这一事实表明,中央圆锥角膜在中央比周边圆锥角膜更软或更具顺应性,这与病变位置一致。这一结果证明圆锥角膜中的角膜弱化本质上是局部性的,与板层方向的局部破坏一致。