Health and Safety Executive research on wood dust exposure controls in British manufacturing.

To generate new intelligence on occupational exposure to wood dust in woodworking manufacturing activities in Britain, the Health and Safety Executive (HSE) performed 22 occupational hygiene site visits to assess exposure and exposure controls between 2014 and 2017. The work aimed to characterise good practice and therefore sites with a poor health and safety record, as identified from HSE inspection records, were not invited to participate. Sites selected covered furniture production, joinery, saw milling, and boat building and repair. Twenty-three follow-up telephone interviews were also carried out across 15 of the companies with supervisors and managers to explore how they tried to promote good practice among the workforce, and if there are any potential challenges encountered. The aim of the interviews was to gain a better understanding of how to enable organisations to improve the management of wood dust exposure. This study found that 6.0% of all wood dust exposure measurements (15 out of 252) were above 5 mg/m³, and 17.6% of exposures to hardwood dust or mixtures of hardwood and softwood dust (38 out of 216) were above 3 mg/m³ (the then current and future workplace exposure limits). Sanding, cleaning, and maintenance activities were of particular concern. Improvements to exposure controls are required, in particular, improvements to local exhaust ventilation controls for hand-held power tools and hand sanding. The management, selection, and use of respiratory protective equipment were poor. All the managers and supervisors recognised that exposure to wood dust can pose serious health risks, and that controls were crucial to protecting workers' health. The findings from the telephone interviews suggest that supervision and provision of information about the health effects of exposure to wood dust were common approaches that organisations used to raise awareness and promote good practice, in relation to managing wood dust exposure. Worker attitudes towards controls, such as perceptions that they hinder task completion and habitual ways of working, were identified as factors influencing the use of controls. Risk communication approaches that focus on increasing workers' awareness of their susceptibility to ill-health using credible sources, such as peers, can help enhance the uptake of messages on the use of controls. Financial constraints were identified as a challenge to improving the control of wood dust, particularly for small companies.