Suppr超能文献

第一恒磨牙的形态变异和非度量解剖特征或异常,加上用于性别鉴定的磨牙大小阈值。

Morphometric variations and nonmetric anatomical traits or anomalies of the primary molar teeth, plus the molars' size thresholds for sex identification.

机构信息

Department of Orthodontics, School of Dentistry, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran.

Dentist, School of Dentistry, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran.

出版信息

BMC Oral Health. 2024 Feb 7;24(1):200. doi: 10.1186/s12903-024-03908-4.

Abstract

INTRODUCTION

Morphological and morphometric features of the teeth are of interest to various clinical and academic dental and medical fields including prosthodontics, orthodontics, anatomy and anthropology, pathology, archeology, and forensic dentistry. These have been more or less researched in the case of the permanent dentition. However when it comes to the primary dentition, the literature is scarce and controversial. No study worldwide exists on the cutoff points (thresholds) for sex identification; no study exists on metric or nonmetric traits of deciduous teeth in Iranians. Hence, the aim of the study was to assess both the metric and nonmetric traits of primary molars, as well as their cut-off points for sex identification.

METHODS

In this epidemiological cross-sectional study, pretreatment casts of 110 children (51 boys and 59 girls) aged 6 to 12 years were collected. Maxillary and mandibular first and second primary molars were evaluated regarding their metric traits (mesiodistal and buccolingual widths) and 9 nonmetric traits (Accessory cusp on the upper D, Accessory cusp on the lower D, Fifth cusp on the upper E, Carabelli's cusp on the upper E, Protostylid on the lower E, Fifth cusp on the lower E, Sixth cusp on the lower E, Tuberculum intermedium [metaconulid] on the lower E, and Deflecting wrinkle on the lower E). ROC curves were used to identify cut-off points for sex determination as well as the usefulness of metric measurements for this purpose. Data were analyzed using independent-samples and paired-samples t-tests, McNemar, Fisher, and chi-square tests, plus Pearson and Spearman correlation coefficients (α = 0.05).

RESULTS

All the primary molars' coronal dimensions (both mesiodistal and buccolingual) were extremely useful for sex identification (ROC curves, all P values ≤ 0.0000099). Especially, the mandibular primary molars (areas under ROC curves [AUCs] between 85.6 and 90.4%, P values ≤ 0.0000006) were more useful than the maxillary ones (AUCs between 80.4 and 83.1%, P values ≤ 0. 0000099). In the mandible, the first primary molar (maximum AUC = 90.4%) was better than the second molar (maximum AUC = 86.0%). The optimum thresholds for sex determination were reported. Sex dimorphism was significant in buccolingual and mesiodistal crown widths of all the primary molars (all P values ≤ 0.000132), but it was seen only in the case of 2 nonmetric traits: Deflecting wrinkle (P = 0.001) and Tuberculum intermedium (metaconulid, P = 0.029) on the lower Es, taking into account the unilateral and bilateral cases. The occurrence of nonmetric traits was symmetrical between the right and left sides (all P values ≥ 0.250). All mesiodistal and two buccolingual molar measurements were as well symmetrical (P > 0.1); however, two buccolingual measurements were asymmetrical: in the case of the maxillary E (P = 0.0002) and mandibular D (P = 0.019). There were three weak-to-moderate correlations between the nonmetric traits of the mandibular second molars (Spearman correlations between 22.7 and 37.5%, P values ≤ 0.045). Up to 6 concurrent nonmetric traits were observed in the sample, with 53.6% of the sample showing at least 2 concurrent nonmetric traits at the same time, without any sex dimorphism (P = 0.658).

CONCLUSION

Sex dimorphism exists considerably in primary molars' sizes, but it is not as prevalent in their nonmetric traits or abnormalities. Primary molars' crown sizes are useful for sex identification; we calculated optimum cut-off points for this purpose, for the first time.

摘要

简介

牙齿的形态和形态计量特征引起了各种临床和学术牙科和医学领域的关注,包括修复学、正畸学、解剖学和人类学、病理学、考古学和法医牙科。这些在恒牙中或多或少都有研究。然而,当涉及到乳牙时,文献却很少,而且存在争议。目前,全世界都没有关于性别鉴定的截断点(阈值)的研究;也没有关于伊朗人乳齿的度量或非度量特征的研究。因此,本研究的目的是评估乳磨牙的度量和非度量特征,以及它们用于性别鉴定的截断点。

方法

在这项横断面流行病学研究中,收集了 110 名 6 至 12 岁儿童(51 名男孩和 59 名女孩)的预处理牙模。评估上颌和下颌第一和第二乳磨牙的度量特征(近远中宽度和颊舌宽度)和 9 个非度量特征(上颌 D 上的附加尖、上颌 D 上的附加尖、上颌 E 上的第五尖、上颌 E 上的 Carabelli 尖、上颌 E 上的 Protostylid、上颌 E 上的第五尖、上颌 E 上的第六尖、上颌 E 上的中突间(metaconulid)和上颌 E 上的偏斜皱折)。使用 ROC 曲线确定性别判断的截断点,以及度量测量在这方面的有用性。使用独立样本和配对样本 t 检验、McNemar、Fisher 和卡方检验,以及 Pearson 和 Spearman 相关系数(α=0.05)进行数据分析。

结果

所有乳磨牙的冠部尺寸(近远中宽度和颊舌宽度)都非常有助于性别鉴定(ROC 曲线,所有 P 值均≤0.0000099)。特别是下颌乳磨牙(ROC 曲线下面积[AUC]为 85.6%至 90.4%,P 值均≤0.0000006)比上颌乳磨牙(AUC 为 80.4%至 83.1%,P 值均≤0.0000099)更有用。在下颌,第一乳磨牙(最大 AUC=90.4%)优于第二乳磨牙(最大 AUC=86.0%)。报告了最佳的性别判断阈值。所有乳磨牙的颊舌和近远中冠宽度都存在性别二态性(所有 P 值均≤0.000132),但仅在 2 个非度量特征中可见:偏斜皱折(P=0.001)和下颌 E 上的中突间(metaconulid,P=0.029),单侧和双侧病例均如此。非度量特征的发生在左右两侧是对称的(所有 P 值均≥0.250)。所有近远中磨牙测量值和两个颊舌测量值都是对称的(P>0.1);然而,两个颊舌测量值是不对称的:在上颌 E(P=0.0002)和下颌 D(P=0.019)。下颌第二乳磨牙的非度量特征之间存在三个弱到中度的相关性(Spearman 相关系数为 22.7%至 37.5%,P 值均≤0.045)。在样本中观察到高达 6 个并发的非度量特征,53.6%的样本同时显示至少 2 个并发的非度量特征,没有任何性别二态性(P=0.658)。

结论

乳磨牙的大小存在明显的性别二态性,但在非度量特征或异常方面并不常见。乳磨牙的冠部大小可用于性别鉴定;我们为此计算了最佳的截断点,这是首次。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/19e7/10848364/70f46318d575/12903_2024_3908_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验