Toyota Central R&D Labs, Inc., Nagakute, Aichi 480-1192, Japan.
ACS Appl Mater Interfaces. 2024 Feb 28;16(8):10590-10600. doi: 10.1021/acsami.3c15125. Epub 2024 Feb 11.
To inhibit viral infection, it is necessary for the surface of polypropylene (PP), a polymer of significant industrial relevance, to possess biocidal properties. However, due to its low surface energy, PP weakly interacts with other organic molecules. The biocidal effects of quaternary ammonium compounds (QACs) have inspired the development of nonwoven PP fibers with surface-bound quaternary ammonium (QA). Despite this advancement, there is limited knowledge regarding the durability of these coatings against scratching and abrasion. It is hypothesized that the durability could be improved if the thickness of the coating layer were controlled and increased. We herein functionalized PP with three-dimensionally surface-grafted poly(-benzyl-4-vinylpyridinium bromide) (PBVP) by a simple and rapid method involving graft polymerization and benzylation and examined the influence of different factors on the antiviral effect of the resulting plastic by using a plaque assay. The thickness of the PBVP coating, surface roughness, and amount of QACs, which jointly determine biocidal activity, could be controlled by adjusting the duration and intensity of the ultraviolet irradiation used for grafting. The best-performing sample reduced the viral infection titer of an enveloped model virus (bacteriophage ϕ6) by approximately 5 orders of magnitude after 60 min of contact and retained its antiviral activity after surface polishing-simulated scratching and abrasion, which indicated the localization of QACs across the coating interior. Our method may expand the scope of application to resin plates as well as fibers of PP. Given that the developed approach is not limited to PP and may be applied to other low-surface-energy olefinic polymers such as polyethylene and polybutene, our work paves the way for the fabrication of a wide range of biocidal surfaces for use in diverse environments, helping to prevent viral infection.
为了抑制病毒感染,具有重要工业相关性的聚合物聚丙烯(PP)的表面必须具有杀菌性能。然而,由于其低表面能,PP 与其他有机分子的相互作用较弱。季铵化合物(QACs)的杀菌效果启发人们开发了具有表面结合季铵(QA)的无纺 PP 纤维。尽管取得了这一进展,但对于这些涂层在抗划伤和磨损方面的耐久性,人们的了解有限。如果可以控制和增加涂层的厚度,那么就可以提高耐久性。我们通过一种简单快速的方法,即用接枝聚合和苄基化将三维表面接枝的聚(-苄基-4-乙烯基吡啶溴化物)(PBVP)功能化到 PP 上,并通过噬菌斑试验考察了不同因素对所得塑料抗病毒效果的影响。通过调整用于接枝的紫外线照射的持续时间和强度,可以控制 PBVP 涂层的厚度、表面粗糙度和 QAC 的量,这些因素共同决定了杀菌活性。表现最好的样品在接触 60 分钟后,将包膜模型病毒(噬菌体 ϕ6)的病毒感染滴度降低了约 5 个数量级,并在经过表面抛光模拟划伤和磨损后保留了其抗病毒活性,这表明 QAC 分布在涂层内部。我们的方法可能会将应用范围扩展到树脂板以及 PP 纤维。由于所开发的方法不仅限于 PP,并且可以应用于其他低表面能烯烃聚合物,如聚乙烯和聚丁烯,因此我们的工作为制造用于各种环境的杀菌表面铺平了道路,有助于预防病毒感染。