Han Keying, Guo Defeng, Han Yuxin, Zhao Pei, Liang Yan, Wang Qiang
State Key Laboratory of Metastable Materials Science and Technology and Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao 066004, People's Republic of China.
College of Physics and Optoelectronic Engineering, Faculty of Information Science and Engineering, Ocean University of China, Songling Road 238, Qingdao 266100, People's Republic of China.
Phys Chem Chem Phys. 2024 Mar 6;26(10):8539-8546. doi: 10.1039/d3cp06247c.
Identifying high-efficiency solar photovoltaic systems with two-dimensional (2D) materials is still an urgent challenge to meet modern energy requirements. Very recently, a 2D heterostructure with type-II band alignment has been confirmed to be more favorable for application in photoelectric conversion. However, the staggered band offset of 2D type-II heterostructures cannot always be guaranteed, nor the intrinsic hindrance mechanism of carrier recombination being clear. In this study, taking the emerging ZrSSe/HfSSe van der Waals heterostructure (vdWH) as a generic example, a boosting strategy for improving the photoelectric performances of 2D vdWHs is proposed. Through a series of in-depth systematic research studies based on first-principles, we demonstrate that applying a vertical strain, an anticipated band alignment transition from type-I to favorable type-II of this ZrSSe/HfSSe vdWH can be induced due to the interfacial charge redistribution, during which a corresponding enlarged photocurrent can be detected from the latter based device compared to the former. Essentially, such enhanced photocurrent at the incident photon energy () around the band gap is attributed to the suppressed recombination rate of photoexcited carriers. Moreover, when is increased into the visible light region, the photoelectric conversion performances can be further controlled by vertical strain. These generalized findings not only provide an effective manipulation strategy for enhancing the performances of 2D solar photovoltaic systems, but the intrinsic physical mechanism can also be extended to the next practical design and regulation of other 2D photovoltaic devices.
利用二维(2D)材料识别高效太阳能光伏系统仍然是满足现代能源需求的一项紧迫挑战。最近,已证实具有II型能带排列的二维异质结构在光电转换应用中更具优势。然而,二维II型异质结构的交错带偏移并非总能得到保证,载流子复合的内在阻碍机制也尚不明确。在本研究中,以新兴的ZrSSe/HfSSe范德华异质结构(vdWH)为例,提出了一种提高二维vdWH光电性能的促进策略。通过一系列基于第一性原理的深入系统研究,我们证明,施加垂直应变时,由于界面电荷重新分布,该ZrSSe/HfSSe vdWH可诱导出预期的从I型到有利的II型能带排列转变,在此过程中,与前者相比,基于后者的器件可检测到相应增大的光电流。本质上,在带隙附近的入射光子能量()处这种增强的光电流归因于光激发载流子复合率的抑制。此外,当增大到可见光区域时,光电转换性能可通过垂直应变进一步控制。这些普遍发现不仅为提高二维太阳能光伏系统的性能提供了一种有效的操纵策略,而且其内在物理机制也可扩展到其他二维光伏器件的下一个实际设计和调控中。