Polukarova Maria, Hjort Mattias, Gustafsson Mats
Swedish National Road and Transport Research Institute Linköping (VTI), Box 8072, SE-402 78 Gothenburg, Sweden; Department of Architecture and Civil Engineering, Division of Water Environment Technology, Chalmers University of Technology, 412 96 Gothenburg, Sweden.
Swedish National Road and Transport Research Institute Linköping (VTI), Bruksgatan 8, SE-222 36 Lund, Sweden.
Sci Total Environ. 2024 May 10;924:171391. doi: 10.1016/j.scitotenv.2024.171391. Epub 2024 Feb 29.
The use of vehicle tires has been identified as a major source of microplastics in the environment and an increasing source of urban particulate air pollution. In light of increasing traffic volumes, increasingly heavier and more powerful vehicles due to trends and electrification, and the lack of tire wear regulation, methods to estimate and monitor changes in national emissions are needed as input for environmental impact assessments. Emission estimations of tire wear are made either based on the mileage approach or the sales approach. This study aims to investigate if and how the mileage approach can be improved by using emission factors for passenger cars and LDVs based on our own measurements and emission factors from the literature for HDVs and buses. An approach with emission factor adjustments based on weight and number of tires in combination with highly detailed mileage data has been evaluated. Sales approach calculations have been used to validate the method. A secondary aim was to use the new mileage approach framework to calculate the national tire wear emissions for Sweden. These calculations resulted in slightly lower total emissions than previous estimations provide, but with higher emissions for passenger cars and light-duty vehicles, and lower emissions for heavy-duty vehicles and motorcycles. Passenger cars constitute more than half of the total emissions. It is concluded that even though the framework offers greater detail, thus increasing the possibilities to adjust for changes in emission factors and mileages in specific vehicle categories, the challenges posed by such factors as the lack of measured emission factors for heavy-duty vehicles and uncertainties regarding the quality of mileage statistics makes the estimations uncertain. Important future suggestions for research include establishing reliable emission factors, especially for heavy-duty vehicles, and initiating research to better understand how climate, road networks, surface properties, and vehicle fleet characteristics affect emission factors.
车辆轮胎的使用已被确认为环境中微塑料的主要来源以及城市颗粒物空气污染的一个日益重要的来源。鉴于交通流量不断增加、车辆因发展趋势和电动化而日益重型化和强大,以及缺乏轮胎磨损法规,需要有估算和监测国家排放量变化的方法,作为环境影响评估的输入。轮胎磨损的排放估算要么基于里程法,要么基于销售法。本研究旨在调查是否以及如何通过使用基于我们自己测量的乘用车和轻型商用车排放因子以及来自文献的重型车辆和公交车排放因子来改进里程法。已评估了一种基于重量和轮胎数量调整排放因子并结合高度详细的里程数据的方法。销售法计算已用于验证该方法。第二个目标是使用新的里程法框架来计算瑞典的国家轮胎磨损排放量。这些计算得出的总排放量略低于先前的估计,但乘用车和轻型商用车的排放量较高,重型车辆和摩托车的排放量较低。乘用车占总排放量的一半以上。得出的结论是,尽管该框架提供了更多细节,从而增加了针对特定车辆类别排放因子和里程变化进行调整的可能性,但重型车辆缺乏实测排放因子以及里程统计质量存在不确定性等因素带来的挑战使得估算存在不确定性。未来重要的研究建议包括建立可靠的排放因子,特别是针对重型车辆,并开展研究以更好地了解气候、道路网络、路面特性和车辆车队特征如何影响排放因子。