Wang Xiu, Zhang Zhi, Li Peiyun, Xu Jingcao, Zheng Yuting, Sun Wenxi, Xie Mingyue, Wang Juanrong, Pan Xiran, Lei Xun, Wang Jingyi, Chen Jupeng, Chen Yiheng, Wang Shu-Jen, Lei Ting
Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, School of Materials Science and Engineering, Peking University, Beijing, 100871, P. R. China.
College of Engineering, Peking University, Beijing, 100871, P. R. China.
Adv Mater. 2024 Jun;36(24):e2400287. doi: 10.1002/adma.202400287. Epub 2024 Mar 8.
Organic electrochemical transistors (OECTs) have attracted increasing attention due to their merits of high transconductance, low operating voltage, and good biocompatibility, ideal for biosensors. However, further advances in their practical applications face challenges of low n-type performance and poor stability. Here, it is demonstrated that wet-spinning the commercially available n-type conjugated polymer poly(benzimidazobenzophenanthroline) (BBL) into highly aligned and crystalline fibers enhances both OECT performance and stability. Although BBL is only soluble in high-boiling-point strong acids, it can be wet-spun into high-quality fibers with adjustable diameters. The BBL fiber OECTs exhibit a record-high area-normalized transconductance (g) of 2.40 µS µm and over 10 times higher figure-of-merit (µC*) than its thin-film counterparts. More importantly, these fiber OECTs exhibit remarkable stability with no noticeable performance attenuation after 1500 cycles over 4 h operation, outperforming all previously reported n-type OECTs. The superior performance and stability can be attributed to shorter π-π stacking distance and ordered molecular arrangement in the fibers, endowing the BBL fiber OECT-based biosensors with outstanding sensitivity while keeping a miniaturized form factor. This work demonstrates that, beyond new material development, developing new fabrication technology is also crucial for addressing the performance and stability issues in n-type OECTs.
有机电化学晶体管(OECTs)因其具有高跨导、低工作电压和良好的生物相容性等优点而受到越来越多的关注,是生物传感器的理想选择。然而,它们在实际应用中的进一步发展面临着n型性能低和稳定性差的挑战。在此,研究表明,将市售的n型共轭聚合物聚(苯并咪唑并苯并菲咯啉)(BBL)湿法纺丝成高度取向和结晶的纤维,可提高OECT的性能和稳定性。尽管BBL仅溶于高沸点强酸,但它可以被湿法纺丝成直径可调的高质量纤维。BBL纤维OECT的面积归一化跨导(g)达到2.40 μS µm的创纪录高位,其品质因数(µC*)比薄膜同类产品高出10倍以上。更重要的是,这些纤维OECT表现出卓越的稳定性,在4小时的操作中经过1500次循环后性能没有明显衰减,优于所有先前报道的n型OECT。其优异的性能和稳定性可归因于纤维中较短的π-π堆积距离和有序的分子排列,这赋予了基于BBL纤维OECT的生物传感器出色的灵敏度,同时保持了小型化的外形尺寸。这项工作表明,除了新材料开发之外,开发新的制造技术对于解决n型OECT中的性能和稳定性问题也至关重要。