Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran.
Department of Civil and Coastal Engineering, University of Florida, Gainesville, FL, USA.
Environ Sci Pollut Res Int. 2024 Apr;31(16):23942-23950. doi: 10.1007/s11356-024-32703-5. Epub 2024 Mar 4.
Cigarette butt is a hazardous waste, and its management faces many challenges. The generation of leachate containing many pollutants including heavy metals is one of the limitations of recycling cigarette butts. The aim of this study was to reduce organic compounds and heavy metals in leachate resulting from cigarette butt recycling in an electrocoagulation reactor. For this purpose, two samples, including freshly smoked cigarette butts and littered cigarette butts, were processed and the treatment of leachate resulting from them was studied in an electrocoagulation reactor. The efficiency of leachate treatment was investigated in the treatment time of 10-40 min and current intensity of 20-100 mA. The results showed that the minimum reduction of chemical oxygen demand and turbidity was 25.3% and 33.4%, respectively. Increasing the current intensity and treatment time increased the efficiency of removing turbidity and chemical oxygen demand up to 47.1% and 41.2%, respectively, in optimum conditions. The reduction of nickel, chromium, cadmium, and lead in the lowest current density and minimum treatment time was more than 90%, which increased to more than 99% with the increase of the current density and treatment time. The use of electrocoagulation is a suitable solution to reduce heavy metals in leachate resulting from cigarette butt recycling, while the proper reduction of organic compounds in this type of leachate requires further treatment processes.
烟蒂是一种危险废物,其管理面临许多挑战。含有许多污染物的浸出液的产生是回收烟蒂的限制之一,其中包括重金属。本研究的目的是在电凝反应器中减少回收烟蒂产生的浸出液中的有机化合物和重金属。为此,处理了两个样本,包括新鲜吸烟的烟蒂和乱扔的烟蒂,并在电凝反应器中研究了它们的浸出液的处理。在 10-40 分钟的处理时间和 20-100 mA 的电流强度下,研究了浸出液处理的效率。结果表明,化学需氧量和浊度的最低减少率分别为 25.3%和 33.4%。在最佳条件下,增加电流强度和处理时间可将去除浊度和化学需氧量的效率分别提高至 47.1%和 41.2%。在最低电流密度和最短处理时间下,镍、铬、镉和铅的减少率超过 90%,随着电流密度和处理时间的增加,减少率增加至超过 99%。使用电凝是减少回收烟蒂产生的浸出液中重金属的一种合适的解决方案,而要适当减少这种类型的浸出液中的有机化合物,则需要进一步的处理过程。