Department of Orthopedic, Trauma and Plastic Surgery, University of Leipzig, Liebigstraße 20, Leipzig, 04103, Germany.
Institute of Anatomy, University of Leipzig, Liebigstraße 13, Leipzig, 04103, Germany.
BMC Musculoskelet Disord. 2024 Mar 12;25(1):212. doi: 10.1186/s12891-024-07346-9.
In terms of the optics used for Knee arthroscopy, a large number of different endoscopes are currently available. However, the use of the 30° optics in knee arthroscopy has been established as the standard procedure for many years. As early as the 1990s, needle arthroscopy was occasionally used as a diagnostic tool. In addition to the development of conventional optics technology in terms of camera and resolution, needle arthroscopes are now available with chip-on-tip image sensor technology. To date, no study has compared the performance of this kind of needle arthroscopy versus standard arthroscopy in the clinical setting in terms of the visibility of anatomical landmarks. In this monocentric prospective feasibility study, our aim was to evaluate predefined anatomical landmarks of the knee joint using needle arthroscopy (0° optics) and conventional knee arthroscopy (30° optics) and compare their performance during knee surgery.
Examinations were performed on eight cadavers and seven patients who required elective knee arthroscopy. Two surgeons independently performed the examinations on these 15 knee joints, so that we were able to compare a total of 30 examinations. The focus was on the anatomical landmarks that could be visualized during a conventional diagnostic knee arthroscopy procedure. The quality of visibility was evaluated using a questionnaire.
In summary, the average visibility for all the anatomic landmarks was rated 4.98/ 5 for the arthroscopy using 30° optics. For needle arthroscopy, an average score of 4.89/ 5 was obtained. Comparatively, the needle arthroscope showed slightly limited visibility of the retropatellar gliding surface in eight (4.5/ 5 vs. 5/ 5), medial rim of the patella in four (4.85/ 5 vs. 5/ 5), and suprapatellar recess in four (4.83/ 5 vs. 5/ 5) cases. Needle arthroscopy was slightly better at visualizing the posterior horn of the medial meniscus in four knee joints (4.9/ 5 vs. 4.85/ 5).
Needle arthroscopy is a promising technology with advantages in terms of minimally invasive access and good visibility of anatomical landmarks. However, it also highlights some limitations, particularly in cases with challenging anatomy or the need for a wide field of view.
在膝关节镜检查中使用的光学器件方面,目前有大量不同的内窥镜可供选择。然而,30°光学器件在膝关节镜检查中的使用多年来已被确立为标准程序。早在 20 世纪 90 年代,针状关节镜偶尔被用作诊断工具。除了在相机和分辨率方面开发传统的光学技术外,现在还可以使用带有芯片上传感器技术的针状关节镜。迄今为止,尚无研究比较这种针状关节镜与标准关节镜在临床环境中针对解剖标志的可视性方面的性能。在这项单中心前瞻性可行性研究中,我们的目的是使用针状关节镜(0°光学器件)和常规膝关节镜(30°光学器件)评估膝关节的预定义解剖标志,并比较它们在膝关节手术中的性能。
对 8 具尸体和 7 名需要择期膝关节镜检查的患者进行了检查。两位外科医生分别对这 15 个膝关节进行了检查,因此我们总共可以比较 30 次检查。重点是在常规诊断性膝关节镜检查过程中可以看到的解剖标志。使用问卷评估可视性质量。
总的来说,所有解剖标志的平均可视性评分均为使用 30°光学器件的关节镜检查得 4.98/5。对于针状关节镜检查,平均得分为 4.89/5。相比之下,针状关节镜检查显示在 8 例(4.5/5 与 5/5)中对髌下滑动面的后视野稍微有限,在 4 例(4.85/5 与 5/5)中对髌骨内侧缘,在 4 例(4.83/5 与 5/5)中对髌上隐窝。针状关节镜在 4 个膝关节中稍微更好地观察内侧半月板后角(4.9/5 与 4.85/5)。
针状关节镜是一种很有前途的技术,具有微创入路和解剖标志良好可视性的优势。然而,它也突出了一些局限性,特别是在具有挑战性的解剖结构或需要宽视野的情况下。