Department of Neurosurgery, İzmir Kâtip Çelebi University, Atatürk Research and Training Hospital.
Department of Neurosurgery, İzmir Atatürk Research and Training Hospital, İzmir, Turkey.
Clin Spine Surg. 2024 Jul 1;37(6):E269-E277. doi: 10.1097/BSD.0000000000001577. Epub 2024 Mar 12.
Retrospective cohort study.
To report our modified tap-drilling technique for mid-cervical pedicle screw placement and to evaluate its safety and accuracy.
Cervical pedicle screw fixation, which provides a strong stabilization, has been a major concern due to the potential risks to neurovascular structures despite its increasing use. Several insertion techniques have been described so far to improve the cervical pedicle screw placement accuracy.
This study retrospectively reviewed patients who underwent mid-cervical (C3-C6) pedicle screw fixation between September 2005 and September 2020. Laminectomy, laminoforaminotomy, or notch-referred anatomic landmark methods were used to adjust the entry point and the direction of the screws. After the cortical bone was removed at the entry point with a diamond burr, the cancellous bone was slowly drilled with a hand drill starting from 8 to 10 millimeters in length. Then, all of the bone walls were checked with a ball-tip probe to determine if there was any breach. The procedure was repeated several times. After completing the drilling, the screw was inserted without tapping. The breach rate of pedicle screws was analyzed on postoperative computed tomography scans.
A total of 473 mid-cervical pedicle screws were placed in 122 consecutive patients. No navigation or computer-assisted system was used, and the first 2 authors inserted all of the screws. All patients completed the surgery, and no evident intraoperative complications occurred. Postoperative CT scans were obtained for 405 screws. Although deviation was observed for 131 pedicle screws, a critical deviation was observed for only 25 pedicle screws.
Cervical pedicle screw insertion is a risky but applicable technique. Checking all of the bone walls with a ball-tip probe before gradually advancing the hand drill in small amounts, as presented in this article, may lead to the safe and effective placement of cervical pedicle screws.
回顾性队列研究。
报告我们改良的经皮颈椎椎弓根螺钉置入技术,并评估其安全性和准确性。
尽管颈椎椎弓根螺钉固定术的应用日益广泛,但由于存在潜在的神经血管结构损伤风险,因此一直是人们关注的焦点。迄今为止,已经描述了几种置入技术来提高颈椎椎弓根螺钉置入的准确性。
本研究回顾性分析了 2005 年 9 月至 2020 年 9 月间接受颈椎(C3-C6)椎弓根螺钉固定的患者。使用椎板切除术、椎板切开术或切迹参考解剖标志方法来调整螺钉的进钉点和方向。在入口处用钻石钻头去除皮质骨后,用手钻从 8 到 10 毫米长开始缓慢钻取松质骨。然后,用球头探针检查所有骨壁,以确定是否有任何突破。该过程重复多次。完成钻孔后,无需攻丝即可插入螺钉。在术后 CT 扫描上分析椎弓根螺钉的突破率。
共在 122 例连续患者中放置了 473 枚颈椎椎弓根螺钉。未使用导航或计算机辅助系统,由前 2 位作者置入所有螺钉。所有患者均完成了手术,术中未发生明显并发症。术后获得了 405 枚螺钉的 CT 扫描。尽管有 131 枚椎弓根螺钉存在偏差,但只有 25 枚椎弓根螺钉存在临界偏差。
颈椎椎弓根螺钉置入是一种有风险但适用的技术。在逐渐少量推进手钻之前,用球头探针检查所有骨壁,如本文所述,可能会导致安全有效的颈椎椎弓根螺钉置入。