The concentration of phthalates in drinking water in Iran: A systematic review and meta-analysis.

PAE and PC polymers, such as BPA, are utilized to make water bottles. Due to the lack of polymer-chemical interaction, PAE can enter drinking bottles during production, wrapping, and keeping. Phthalates can transfer from the bottle to the water depending on keeping conditions (temperature, time, sunlight intensity), pH, and bottle capacity. Since there haven't been previous studies published on the subject, the aim of this meta-analysis and systematic review research is to determine the level of phthalates in drinking water consumed in Iranian cities. Web of Science, Science of Direct, Scopus, and PubMed, databases have been used in this study. Eight studies were selected from 556 initial publications after screening for duplication and irrelevant information. Articles from January 1, 2000, to February 10, 2024, were found in the mentioned databases. Among the types of phthalates, the concentration of DEHP was reported higher than the others Because its concentration has been reported in seven out of eight studies. The highest concentration of DEHP was reported by Mehraie(2.22 µg/l), Zare Jeddi (0.8 µg/l), Yousefi (0.77 µg/l), Abtahi (0.76 µg/l), Zare Jeddi (0.42 µg/l), Abdolahnejad(0.15 µg/l), and Pourzamani (0.08 µg/l). The highest concentration of DEP, DBP, BBP, and PA was reported by Abtahi (0.77 µg/l) and Esteki (2.25 µg/l), Mehraie(0.93 µg/l), and Pourzamani (0.83 µg/l). The results of this study showed that the most important phthalates measured in drinking water include DEP, DEHP, DBP, BBP, and PA. According to the results of the present studies, the most important factor in the increase of phthalates is the storage conditions of drinking water (temperature, sunlight, and the type of pipe or bottle).