Smoleń Jakub, Olesik Piotr, Nowacki Bartłomiej, Godzierz Marcin, Kurtyka Klaudia, Chaber Paweł, Czakiert Jan, Kozioł Mateusz
Faculty of Materials Engineering, Silesian University of Technology, Krasińskiego 8 Street, 40-019, Katowice, Poland.
Faculty of Materials Science, Department of Industrial Informatics, Joint Doctoral School, Silesian University of Technology, Krasińskiego 8, 40-019, Katowice, Poland.
Sci Rep. 2024 Mar 28;14(1):7446. doi: 10.1038/s41598-024-57999-8.
Degradation of polymer composites is a significant problem in many engineering aspects. Due to the interaction of various degradation factors during the exploitation of composites, a synergistic effect of destruction is observed. The article describes the phenomena occurring in glass fiber reinforced polyester laminates under the influence of ultraviolet radiation (UV) in an aquatic environment. The laminates were exposed to UV-A, UV-B and UV-C radiation for 1000 h in free-air and underwater conditions. During the test, the materials were immersed at stable depth of 1 mm and 10 mm, respectively. The three-point bending tests performed on the samples after being exposed to UV showed an increase in the flexural strength of the composites. Simultaneously, degradation of the outer surface layer was observed. The degradation removed the thin resin film from the surface which resulted in a direct exposure of the reinforcing fibers to the environment. The transformations taking place in the deeper layers of the composite increased the mechanical strength due to the additional cross-linking reactions excited by the energy arising from the radiation. Moreover, the formation of polymer structures from free styrene remaining after the technological process and the occurrence of free radical reactions as a result of the cage effect was also observed.
聚合物复合材料的降解在许多工程领域都是一个重大问题。由于复合材料在使用过程中各种降解因素的相互作用,会观察到一种破坏的协同效应。本文描述了在水生环境中,玻璃纤维增强聚酯层压板在紫外线(UV)辐射影响下所发生的现象。这些层压板在自由空气和水下条件下分别接受UV - A、UV - B和UV - C辐射1000小时。在测试过程中,材料分别被浸入到1毫米和10毫米的稳定深度。对暴露于紫外线后的样品进行的三点弯曲试验表明,复合材料的弯曲强度有所增加。同时,观察到外层表面发生了降解。降解使表面的薄树脂膜脱落,导致增强纤维直接暴露于环境中。由于辐射产生的能量激发了额外的交联反应,复合材料较深层发生的转变提高了机械强度。此外,还观察到工艺过程后残留的游离苯乙烯形成聚合物结构以及由于笼效应而发生的自由基反应。