Nie Wen, Cai Yuankun, Wang Luyao, Liu Qiang, Jiang Chenwang, Hua Yun, Guo Lidian, Cheng Chuanxing, Zhang Haonan
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, Shandong Province, China; State Key Laboratory of Mining Disaster Prevention and Control Co-found by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China.
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, Shandong Province, China; State Key Laboratory of Mining Disaster Prevention and Control Co-found by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China.
Sci Total Environ. 2024 Jun 10;928:172428. doi: 10.1016/j.scitotenv.2024.172428. Epub 2024 Apr 13.
The increasing level of mechanization in coal mining means more dust and gas are generated during excavation operations in tunnels. The high concentrations of dust and gas severely affect production efficiency and the physical and mental health of workers. Here, Ansys Fluent simulations were performed to derive the spatiotemporal evolution of coupled airflow-dust-gas diffusion in a low-gas excavation face. The aim was to optimize pollution control by determining the optimal duct distance, L, from the working face in the excavation tunnel. Our results showed that the airflow field affects the coupled diffusion and transport of dust and gas. According to a comparison of the effects of different duct distances from the working face, when L = 6 m, the average dust concentration in the tunnel is low (257.6 mg/m), and the average gas concentration in the tunnel is 0.28 %, which does not exceed the safety limit. Accordingly, the optimal distance of the duct for pollution control is 6 m. The results of field measurements supported the validity of the simulation. Our findings can be used to improve the air quality in tunnels, thereby keeping miners safe and the working area clean.
煤矿开采机械化程度的提高意味着在巷道掘进作业过程中会产生更多的粉尘和瓦斯。高浓度的粉尘和瓦斯严重影响生产效率以及工人的身心健康。在此,进行了Ansys Fluent模拟,以得出低瓦斯掘进工作面风流 - 粉尘 - 瓦斯耦合扩散的时空演变情况。目的是通过确定掘进巷道中距工作面的最佳风筒距离L来优化污染控制。我们的结果表明,气流场会影响粉尘和瓦斯的耦合扩散与传输。根据对距工作面不同风筒距离影响的比较,当L = 6米时,巷道内的平均粉尘浓度较低(257.6毫克/立方米),巷道内的平均瓦斯浓度为0.28%,未超过安全限值。因此,用于污染控制的风筒最佳距离为6米。现场测量结果支持了模拟的有效性。我们的研究结果可用于改善巷道内的空气质量,从而保障矿工安全并保持工作区域清洁。