dsm-firmenich, Kogle Allé 4, 2970, Hørsholm, Denmark.
dsm-firmenich, Kogle Allé 4, 2970, Hørsholm, Denmark.
Carbohydr Res. 2024 Jul;541:109149. doi: 10.1016/j.carres.2024.109149. Epub 2024 May 18.
As the evidence supporting the beneficial effects of human milk oligosaccharides (HMOs) grows, so does the commercial interest in their inclusion in infant formula products. This also requires analytical methods capable of their quantification from finished infant formula products as well as from premixed ingredients in some cases. The objective of the present study was the development and single-laboratory validation of a method that can be used for this purpose for seven HMOs: 2'-fucosyllactose (2'FL), 3-fucosyllactose (3FL), difucosyllactose (DFL), 3'-sialyllactose (3'SL), 6'-sialyllactose (6'SL), lacto-N-tetraose (LNT), and lacto-N-neotetraose (LNnT). The present method uses labeling by reductive amination, with 4-aminobenzoic acid ethyl ester (benzocaine) as the labeling reagent and picoline borane as the reducing agent, then applies HPLC separation with UV detection. The seven HMOs could be analyzed from infant formula and premix samples with recoveries between 91 and 108 %, relative standard deviations of 4.3 % or lower across all replicates, and limits of quantitation between 0.001 % and 0.004 % of powder sample by weight. The method was found to be rapid and reliable, with a runtime of only 14 min per injection, in contrast to other methods found in literature which typically use nearly or more than an hour. In addition, it uses instrumentation that's readily available in most analytical laboratories.
随着支持人乳寡糖(HMOs)有益效果的证据不断增加,商业利益也越来越关注将其纳入婴儿配方奶粉产品中。这也需要能够从成品婴儿配方奶粉产品以及某些情况下的预混成分中定量分析它们的分析方法。本研究的目的是开发一种可用于此目的的方法,并对其进行单实验室验证,该方法可用于七种 HMOs:2'-岩藻糖基乳糖(2'FL)、3-岩藻糖基乳糖(3FL)、双岩藻糖基乳糖(DFL)、3'-唾液酸乳糖(3'SL)、6'-唾液酸乳糖(6'SL)、乳-N-四糖(LNT)和乳-N-新四糖(LNnT)。本方法使用还原胺化标记,以 4-氨基苯甲酸乙酯(苯佐卡因)作为标记试剂,并用吡啶硼烷作为还原剂,然后应用 HPLC 分离,用紫外检测。该方法可从婴儿配方奶粉和预混料样品中分析七种 HMOs,回收率在 91%至 108%之间,所有重复的相对标准偏差均低于 4.3%,定量限在 0.001%至 0.004%(以粉末样品重量计)。与文献中发现的其他方法相比,该方法的运行时间仅为 14 分钟/次,速度快且可靠,而其他方法通常需要近一个小时或更长时间。此外,它使用的仪器在大多数分析实验室中都很容易获得。