Guo Jingyu, Hai Feng, Chen Wenting, Gao Xin, Yi Yikun, Xue Weicheng, Tang Wei, Li Mingtao
Shaanxi Key Laboratory of Energy Chemical Process Intensification, School of Chemical Engineering and Technology, Xi'an Jiaotong University, No. 28 Xianning West Road, Xi'an, Shaanxi 710049, China.
ACS Appl Mater Interfaces. 2024 Jun 19;16(24):31056-31066. doi: 10.1021/acsami.4c02848. Epub 2024 Jun 6.
High-voltage (>4.35 V) lithium nickel-cobalt-manganese batteries are star candidates due to their higher energy density for next-generation power batteries. This poses higher demands for electrolyte design, including compatibility with lithium metals, stability on high-voltage cathodes, speedy interfacial ion transport kinetics, and appropriate concentration. However, electrolytes at the current level of research struggle to balance these demands. Here, we took advantage of the reduced affinity with Li and enhanced oxidative stability of three fluorinated linear carbonates to design a series of weakly solvating electrolytes (WSEs) at a low salt concentration of 1 M, which contain abundant ionic cluster structures, leading to the optimization of interfacial chemistry. As a result, WSEs can support the stable cycling of 4.6 V high-voltage Li||NCM811 cells for 300 cycles with a capacity retention of nearly 80%. Moreover, benefiting from the lower desolvation energy of Li, WSEs achieve superior cycling stability and low polarization under -20 °C. Our work extends the application of WSEs for high-voltage LMBs, providing a promising solution in electrolytes for high-specific-energy lithium batteries.
高压(>4.35 V)锂镍钴锰电池因其较高的能量密度成为下一代动力电池的理想选择。这对电解质设计提出了更高要求,包括与锂金属的兼容性、在高压阴极上的稳定性、快速的界面离子传输动力学以及合适的浓度。然而,当前研究水平的电解质难以平衡这些要求。在此,我们利用三种氟化线性碳酸酯与锂的亲和力降低和氧化稳定性增强的特性,设计了一系列低盐浓度(1 M)的弱溶剂化电解质(WSEs),其含有丰富的离子簇结构,从而优化了界面化学。结果,WSEs能够支持4.6 V高压Li||NCM811电池稳定循环300次,容量保持率近80%。此外,受益于锂较低的去溶剂化能,WSEs在-20°C下实现了卓越的循环稳定性和低极化。我们的工作拓展了WSEs在高压锂金属电池中的应用,为高比能锂电池的电解质提供了一个有前景的解决方案。